Page 14 of 18 FirstFirst ... 41213141516 ... LastLast
Results 131 to 140 of 180
  1. #131
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,369

    Default

    Quote Originally Posted by mattsask View Post
    My 2016 craz came wired with 16 gauge. I literally just finished installing some different towers and amp. I'm on the fence about pulling some 12g when I find the time. Running about 240 rms to each speaker

    Sent from my SM-G900W8 using Tapatalk
    What speakers are you running?


    Sent from my iPhone using Tapatalk
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  2. #132
    Join Date
    Nov 2014
    Posts
    704

    Default

    I just have a pair of krypt 7.7 HLCD's bridged off a 4 channel kicker. Color me impressed.... They are loud!

    Sent from my SM-G900W8 using Tapatalk
    2016 Craz.
    Enzo bags.

  3. #133
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    2,467

    Default

    With that wattage and distance of a typical tower run, 16ga is a little light. Pull 12ga you would not need to ever upgrade again again.

  4. #134
    Join Date
    Oct 2016
    Location
    Tims Ford Lake TN
    Posts
    453

    Default

    It is 16 ga from the factory. On my 16 Mojo anyway
    2016 Mojo Surf
    Raptor 400
    1100 rear bags / 500 IBS / 600 LeadWake
    Exile amps/tower - Kicker in-boat
    FAE

  5. #135
    Join Date
    Nov 2013
    Location
    West of ATL
    Posts
    365

    Default



    Let's build something
    2008 LSV on the way out
    '17 CRAZ!!! on the way in

  6. #136
    Join Date
    Nov 2013
    Location
    West of ATL
    Posts
    365

    Default





    Done and WOW!!!

    I'm glad I took off today to install and didn't do this on a weekend. Cause if my neighbors were home they'd be piss at how loud this thing is.

    Still have sone fine tuning to do but there are a beast.
    2008 LSV on the way out
    '17 CRAZ!!! on the way in

  7. #137
    Join Date
    May 2013
    Location
    Vancouver WA
    Posts
    5,021

    Default

    I can relate and tend to agree... (and then some!)

    2008 Moomba Mobius XLV. Monster Cargo Bimini, WS Rev 410's, Polk Cabins, 3 Infinity Subs, PPI amps, WS420, Exile BT, upgraded ballast pumps, up to 3,500+ pounds of ballast, Blue LED's...
    1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.
    Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2009 Audic A6 Avant 3.0T, 2005 Kawasaki ZX-6R 636.
    www.TraysonsToybox.com

  8. #138
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    2,145

    Default

    Getting my Craz out of storage tomorrow and installing my stereo on Sunday.


    Sent from my iPad using Tapatalk
    2017 Moomba Craz

  9. #139
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    2,145

    Default

    Started installing my amps today on my 2017 Craz. Is that blue wire with black stripe with round butt connector that is attached to the bow and port speaker wires near the molex connectors, the remote amp power wire?


    Sent from my iPhone using Tapatalk
    2017 Moomba Craz

  10. #140
    Join Date
    Nov 2013
    Location
    West of ATL
    Posts
    365

    Default

    Quote Originally Posted by Stazi View Post
    Started installing my amps today on my 2017 Craz. Is that blue wire with black stripe with round butt connector that is attached to the bow and port speaker wires near the molex connectors, the remote amp power wire?


    Sent from my iPhone using Tapatalk
    My remote turn on was blue/white. If you look at the top of the picture of the amp rack you'll see the speaker wire connection with a singe wire. That's the remote turn on I just used shrink wrap over the butt connecter. If you have single wire around the molex that might be it maybe the factory ran out of wire. You could always look at the connection behind the Fusion head unit and see what color is hooked to the remote turn on wire.
    2008 LSV on the way out
    '17 CRAZ!!! on the way in

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •