Page 11 of 17 FirstFirst ... 910111213 ... LastLast
Results 101 to 110 of 166
  1. #101
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    My registration #s came in from Domednumbers.com , yellow and Ultra Black metallic flake...



    Sent from my SAMSUNG-SM-G935A using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  2. #102
    Join Date
    Mar 2017
    Location
    Edmonton, Alberta Canada
    Posts
    174

    Default

    [QUOTE=RC_Hinojosa;308512]My registration #s came in from Domednumbers.com , yellow and Ultra Black metallic flake...

    Those look fantastic!
    2002 Supra Santera (SOLD)
    2017 Moomba Mojo Pro Vivid Orange
    (1595lb wakemakers in the lockers)

  3. #103
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Amazon upgrade #2...

    Picked up another 4 ohm KM10 and a rhino-lined dual ported enclosure.

    Two 4 ohm KM10s wired in parallel, presenting a 2 ohm load to the factory KM800.5....this is what factory should come with...this thing bumps!

    Sent from my SAMSUNG-SM-G935A using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  4. #104
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    Quote Originally Posted by RC_Hinojosa View Post
    Amazon upgrade #2...

    Picked up another 4 ohm KM10 and a rhino-lined dual ported enclosure.

    Two 4 ohm KM10s wired in parallel, presenting a 2 ohm load to the factory KM800.5....this is what factory should come with...this thing bumps!

    Sent from my SAMSUNG-SM-G935A using Tapatalk
    Looks like you're missing some hardware!
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  5. #105
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Quote Originally Posted by rdlangston13 View Post
    Looks like you're missing some hardware!
    Yeah, that was a test fit.

    Sent from my SAMSUNG-SM-G935A using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  6. #106
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    608

    Default

    Quote Originally Posted by RC_Hinojosa View Post
    Amazon upgrade #2...

    Picked up another 4 ohm KM10 and a rhino-lined dual ported enclosure.

    Two 4 ohm KM10s wired in parallel, presenting a 2 ohm load to the factory KM800.5....this is what factory should come with...this thing bumps!

    Sent from my SAMSUNG-SM-G935A using Tapatalk
    Do you remember what box that is? I would like to do the same. Thanks

  7. #107
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Quote Originally Posted by 98outback View Post
    Do you remember what box that is? I would like to do the same. Thanks
    Yessir, here you go: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  8. #108
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    608

    Default

    Thanks but it’s not going to work out. I removed the factory kicker 10” and it is 2 ohm. Was hoping it was 4 ohm so I could just add another. I have the kicker 800.5 amp so I guess I’ll just have to start over. Thanks again.

  9. #109
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    That is odd because I could swear the factory KM10 was 4 ohm, maybe mine was a fluke? You'd probably have a hard time off-loading the single 10" but you could snag (2) 4 ohm KM10s off Crutchfield for about $300 - https://www.crutchfield.com/p_206KMW....html?tp=61750

    Good luck and sorry for your trouble.
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  10. #110
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    608

    Default

    No problem. Thanks for sending me the link. Since I have to start over I may just go wetsounds. Here’s a pic of the back of the sub. I’m assuming because on the kicker 800.5 you get 200@4 ohm and 400@2 ohm on the sub channel.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •