2017 Moomba Craz SurfMAX Edition #116821

[TXSurf4]

The shop has been a bit backed up but the WS REV10's look so good in yellow, it's worth the wait

Attachment 25397

Great looking boat! I really like the accents!

I am currently in the process of ordering a boat from Rinkers and I was wondering how well were they able to match your REV10s to the boat? Has the paint held up well on them? I am just concerned that since I am ordering my boat with the tower accents white that they won’t be able to match the white perfectly and that will drive me nuts. TIA

[RC_Hinojosa]

Great looking boat! I really like the accents!

I am currently in the process of ordering a boat from Rinkers and I was wondering how well were they able to match your REV10s to the boat? Has the paint held up well on them? I am just concerned that since I am ordering my boat with the tower accents white that they won’t be able to match the white perfectly and that will drive me nuts. TIA

Thanks, the color matched REV10s and bimini arms add a pop of color on the tower and receive a lot of compliments.

Rinker's did a phenomenal job with the color accents and will take care of you, they have the PPG codes from SC and the Sundance Yellow is totally spot on. After two seasons, the paint has held up extremely well but I also protect the REV10s with Speaker Sox when not in use.

Just make it clear which white you are wanting to match (gel coat vs tower accent) just in case there are tonal differences between the boat and the tower.

[TXSurf4]

Thanks, the color matched REV10s and bimini arms add a pop of color on the tower and receive a lot of compliments.

Rinker's did a phenomenal job with the color accents and will take care of you, they have the PPG codes from SC and the Sundance Yellow is totally spot on. After two seasons, the paint has held up extremely well but I also protect the REV10s with Speaker Sox when not in use.

Just make it clear which white you are wanting to match (gel coat vs tower accent) just in case there are tonal differences between the boat and the tower.

Good to know Thanks again!!

[RC_Hinojosa]

....spring upgrade time, sexy ass surf pipe

Sent from my Note9 using Tapatalk

[TXSurf4]

....spring upgrade time, sexy ass surf pipe

Sent from my Note9 using Tapatalk

Nice!! Looks great!!! How was the install?


Sent from my iPhone using Tapatalk

[RC_Hinojosa]

Nice!! Looks great!!! How was the install?


Sent from my iPhone using Tapatalk

Install was a breeze....Rinker's took care of it for me

Sent from my Note9 using Tapatalk

[TXSurf4]

LOL!! Those are the easiest!!


Sent from my iPhone using Tapatalk

[RC_Hinojosa]

Figured I'd revive this old thread....

Installed an ACME 2937 15 X 11 prop and can't wait to try it out with the boat slammed.

Hat tip to David for letting me borrow his prop puller!



Sent from my SM-N960U using Tapatalk

[TXSurf4]

Sweet!! I know you are running slammed so I assume this is to help you with all that weight?


Sent from my iPhone using Tapatalk

[RC_Hinojosa]

Sweet!! I know you are running slammed so I assume this is to help you with all that weight?


Sent from my iPhone using Tapatalk

Yessir.

The OJ 945 15 X 13 was good with Enzos & lead but kinda struggles when I add a 1000lb sumo sac. It can barely get to 11mph.

I told the ACME rep I primarily surf and run around 5,600lbs of ballast, the 2937 was the recommendation even though Wakemakers prop-finder suggested the 2419 15 X 12.

We may not have high altitude but the rep reminded me our hot humid air is a heat soak for the Raptor.

I'm guessing I'll top out around 27-28mph but I don't really care about that.

My crew tends to run on the small side so we sack it out.

I hope to do some water testing this weekend

Sent from my SM-N960U using Tapatalk