Page 8 of 8 FirstFirst ... 678
Results 71 to 76 of 76
  1. #71
    Join Date
    Dec 2016
    Location
    Seattle
    Posts
    41

    Default

    I'm looking for a solution that doesn't involve welding. I see people have done it without welding but didn't describe how it was fabricated.
    2017 Supra SA400
    2006 Mastercraft X15 - Sold

  2. #72
    Join Date
    Jan 2010
    Location
    North Texas
    Posts
    2,844

    Default

    Where are you seeing that? My route involved welding 1/2" spacers to the oem plate, MLA solution is similar, but his weld is hidden (guessing a cutout on the plate allowing a backside weld).

    You could thru bolt the Wetsounds base thru the spacer into the oem plate if you wanted, but I would for sure want a nut on the inside.

    I had custom brackets I designed machined for mine, and now I'm having a hard time remembering if I was able to put a nut on the inside of the threaded plate. I'm pretty certain, if you thru bolt, the spacing is just enough to let you get a nut on the inside.
    Last edited by dusty2221; 02-05-2017 at 12:07 AM.
    2006 Supra 20 - Sold
    2006 Supra 24 Gravity Games - Sold
    2015 Supra SE450 - Sold

  3. #73
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    1,940

    Default

    I'm looking for a solution that doesn't involve welding.
    CNC milled starting with block of billet. Down side, it leaves quite a bit of material on the floor. But no welding involved.

  4. #74
    Join Date
    Dec 2016
    Location
    Seattle
    Posts
    41

    Default

    Quote Originally Posted by MLA View Post
    CNC milled starting with block of billet. Down side, it leaves quite a bit of material on the floor. But no welding involved.
    There's the confusion. I thought your plates weren't welded. I'll look into getting some adapters machined. You aren't selling yours anymore, correct?
    2017 Supra SA400
    2006 Mastercraft X15 - Sold

  5. #75
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    1,940

    Default

    They are two piece that are welded together. We wen this direct for the very reason noted above.

  6. #76
    Join Date
    Apr 2015
    Posts
    102

    Default

    I know this is bringing back an old thread and probably a long shot but did either of you guys end up making a larger batch of your spacer solution for the sbend uppers that you would be willing to sell?
    2015 Mojo with autoflow

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •