Results 71 to 76 of 76
-
02-04-2017, 08:49 PM #71
I'm looking for a solution that doesn't involve welding. I see people have done it without welding but didn't describe how it was fabricated.
2017 Supra SA400
2006 Mastercraft X15 - Sold
-
02-05-2017, 12:02 AM #72
Where are you seeing that? My route involved welding 1/2" spacers to the oem plate, MLA solution is similar, but his weld is hidden (guessing a cutout on the plate allowing a backside weld).
You could thru bolt the Wetsounds base thru the spacer into the oem plate if you wanted, but I would for sure want a nut on the inside.
I had custom brackets I designed machined for mine, and now I'm having a hard time remembering if I was able to put a nut on the inside of the threaded plate. I'm pretty certain, if you thru bolt, the spacing is just enough to let you get a nut on the inside.Last edited by dusty2221; 02-05-2017 at 12:07 AM.
2006 Supra 20 - Sold
2006 Supra 24 Gravity Games - Sold
2015 Supra SE450 - Sold
-
02-05-2017, 11:27 AM #73I'm looking for a solution that doesn't involve welding.
-
02-05-2017, 01:32 PM #74
-
02-05-2017, 03:27 PM #75
They are two piece that are welded together. We wen this direct for the very reason noted above.
-
12-03-2018, 10:26 PM #76Senior Member
- Join Date
- Apr 2015
- Posts
- 169
I know this is bringing back an old thread and probably a long shot but did either of you guys end up making a larger batch of your spacer solution for the sbend uppers that you would be willing to sell?
2015 Mojo with autoflow