Options for aviator tower speaker upgrades

[BigOrange]

I'm 98% positive its the exact same towers. The dealer I got the used Mojo from said that they liked to order the "supra" towers on their Moomba's because the looked better and sold more. That is the "s-bend" tower.

[dusty2221]

Well, they are for sure not the exact same, shape wise. I'm betting the top plates are however shared between the 2.

Here is a supra sbend.


Compared to a moomba

[KG's Supra24]

Agreed, 100%. They are not the same tower.

At one time (maybe 2013ish) Supra did offer the s-bend tower, before their most recent version. Maybe that is what the dealer meant by Supra tower.

I also agree the top plates are most likely the same because both are Roswell towers. Roswell would know the answer for sure.

[Woody929]

On the mounts, I used Exile's supra mounts, and they work perfect.

[That Guy]

This thread interests me. I'm picking up my Craz in a couple weeks have a pair of Rev10's in my closet at home. I wasn't able to figure everything out exactly when I ordered due to timing but I'm 99% sure that I got it correct. I ordered the X-kit with the Rev10's and then ordered the FACTORY Wetsounds Rev10 mount with my boat. You may have this resolved by the time I get my stereo in but I'll be sure to post back in a month or so to update my findings.

[KG's Supra24]

That Guy, you ordered a 2017, correct?

2017 is the first year with wetsounds factory option. 2017's will have the new Aviator 3 tower, which I think is also made by Roswell.

[BigOrange]

On the mounts, I used Exile's supra mounts, and they work perfect.

Woody -- those Exile mounts worked for your "Moomba s-bend" tower?

[Woody929]

S bend yes

[drewski]

I'm still looking for a solution to mount Rev 10's on the upper mount of a Supra. I was able to bolt the swivel mounts directly to the side plates but there's not enough clearance on the upper plates.

[dusty2221]

Pics of the solution have been posted above.

Sent from my SAMSUNG-SM-G930A using Tapatalk