Results 1 to 4 of 4
  1. #1
    Join Date
    May 2014
    Posts
    5

    Question 2009 Outback direct drive propeller size?

    I have a 2009 Outback** direct drive. What is the factory propeller size? Including the bore size.

    I am considering getting a 3-blade Acme 543 (13 x 11.5) or the 1229 (13 x 11). I am probably 50/50 on wakeboarding and wakesurfing. My OEM prop seems to struggle wakesurfing with 1,200-lbs ballasts, trying to maintain consistent speed.

    tag: impeller

  2. #2
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    In the old days they were 13 x 13. Not sure if your might have been a 13 x 12. Either way, you should do better with either choice above for a heavier load.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  3. #3
    Join Date
    May 2015
    Location
    British Columbia
    Posts
    139

    Default

    Ill check mine when I get home tonight. I cant recall off the top of my head. Im almost positive its a 13x13 on mine with a 1 1/8 shaft size but Ill let you know in a couple hours. I run 2000 + in mine and I have no problems wakesurfing with my factory 3 blade

    Sent from my SGH-I337M using Tapatalk
    2008 Moomba Outback LS
    325 Indmar Assault MPI
    Gravity 1 Ballast with IBS

  4. #4
    Join Date
    May 2015
    Location
    British Columbia
    Posts
    139

    Default

    After a quick check, I confirmed the prop on my Outback is a 13x13. Hope this helps you out

    Sent from my SGH-I337M using Tapatalk
    2008 Moomba Outback LS
    325 Indmar Assault MPI
    Gravity 1 Ballast with IBS

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •