Results 11 to 20 of 33
-
11-24-2016, 09:26 PM #11
-
11-24-2016, 09:39 PM #12Senior Member
- Join Date
- Nov 2014
- Location
- Columbus, Ohio
- Posts
- 388
Whoa! Is that mold? How do I prevent that or how do you recommend I build a box to avoid that? That's gross!
-
11-25-2016, 03:03 AM #13
This is rough to see in the pic but I build a custom enclosed box and suspended it above the floor by putting 4 bolts through the back panel and it doesn't see any water at all and I am very pleased.
This is with the kicker 12" shallow mount sub. I have it overpowered with a jl audio 500.1. I am huge on purpose build pieces and not a huge fan of universal. I get tons of compliments on my stereo
Sent from my SAMSUNG-SM-G930A using Tapatalk
-
11-25-2016, 05:49 PM #14Senior Member
- Join Date
- Nov 2014
- Location
- Columbus, Ohio
- Posts
- 388
Thanks for the pics, I plan to get the sub box off the floor like I did in my last boat.
I'm having a hard time deciding between the X clamps, fixed clamps or swivel clamps. I wish I had the boat here to see where on the tower I could clamp the speaker to get it as far out to the side. In the few pictures I've been able to find online it doesn't appear that there is any space on the tower outside of the Flat mount where Moomba places them to clamp it....is this the case?
-
11-25-2016, 06:56 PM #15is this the case?
-
11-25-2016, 11:22 PM #16Member
- Join Date
- Jul 2016
- Posts
- 33
-
11-26-2016, 01:04 AM #17
I got some ebay led strips and tapped into my courtesy lights so it's on the same switch. I put the strips inside the walls above the speakers ( 6 or 8 total I cant remember). All of maybe half hour and was less than 20 bucks. I'm plenty pleased with it.
Sent from my SAMSUNG-SM-G930A using Tapatalk
-
11-26-2016, 01:55 AM #18Senior Member
- Join Date
- Nov 2014
- Location
- Columbus, Ohio
- Posts
- 388
Thanks MLA and jta, I went with the x mounts which are the cheapest, and will definitely have to buy some blue led strips to add to my interior. So far the sub has a blue glow ring and I'll probably buy rings for the Rev10's but this sounds great for the rest of the boat!
-
02-19-2017, 12:54 PM #19Senior Member
- Join Date
- Nov 2014
- Location
- Columbus, Ohio
- Posts
- 388
Ok, I'm scratching my head here....
How do I attach the speaker with the Wetsounds X-Mount to the 'factory wetsound adapters' that are really Wetsounds Nautique FC5U adapters?
I don't have a way to screw a bolt into it from either way.
Here is a picture of the adapter Moomba uses for the Wetsounds mount to the tower.
https://wetsounds.com/media/products...-fct5-u-lg.jpgBoatless for now
-
02-19-2017, 02:08 PM #20