Results 1 to 10 of 13
-
10-25-2016, 02:27 PM #1
tried some new boat compount/polish/wax.
So I decided to try some new gel coat cleaning products from Chemical Guys and I really liked it. I've used a lot of different stuff over the years and had good success with a lot of them but I'm always looking for the something better. This is the stuff i used and a before and after picture.
Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190
-
10-25-2016, 02:28 PM #2
here are a few final ones.
Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190
-
10-25-2016, 02:37 PM #3
Looks great! What do you do about cutting with the stickers? Do you go over it with the cutting compound or do you do around them? Same question for the wax. My hull needs a good touch up as it was never done by the previous owners and it needs it.
2007 XLV Gravity Games
Full Wake Makers upgraded ballast and pumps
1,100 in each rear locker
1,180 in front
OJ 1435 prop, 325 EFI Indmar Assult.
Fresh Air Exhaust
SuckG8
Bunch of other crap
-
10-25-2016, 02:37 PM #4
Looks sharp!
Sent from my iPhone using Tapatalk2013 LSV Red/White
1100lb upgrades in each rear locker!
Stock 500 Bow ballast
650IBS
Manual Flow equipped
Boards
Hyperlite Hi-Fi "The Illest"
CWB AMG Carbon
Phase 5 Razz
Byerly Volt
4.6 Ronix Koal Fish
Phase Five Scamp (kiddos)
-
10-25-2016, 03:15 PM #5
i just went right over the stickers with the compound and the wax. Didn't have any problems.
Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190
-
10-25-2016, 04:25 PM #6
Mine are in decent shape but they probably need to go. Just wondering for the future once I do replace them. I started removal already.
2007 XLV Gravity Games
Full Wake Makers upgraded ballast and pumps
1,100 in each rear locker
1,180 in front
OJ 1435 prop, 325 EFI Indmar Assult.
Fresh Air Exhaust
SuckG8
Bunch of other crap
-
10-25-2016, 04:45 PM #7
DAMN! That looks great. Now get some product to keep it that way after a day on the water.
-
10-26-2016, 01:54 PM #8
How did you apply and remove? By hand or buffer?
Sent from my iPhone using TapatalkShane
2016 Supra SE
EXILED
6 XM9 Tower
6 Wetsounds XS650 Cabin
1 EXILE BIG 12 DVC 2000 watt in a ported box
1 XM 15.4
XI 1500.1
2 MX 30.2
Wetsounds 420 EQ
EXILE Blue tooth EXBT4
Blue LEDs
-
10-26-2016, 03:46 PM #9Junior Member
- Join Date
- Jun 2015
- Location
- Fargo
- Posts
- 29
I also use Chemical Guys marine products and really like it. Bought my buffer kit from them as well. Both the buffer and their products are really easy to use.
2023 Craz
2013 LSV
-
10-26-2016, 06:02 PM #10
I used a porter cable buffer for the compound and polish. I removed by hand. The wax I applied and removed by hand.
Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190