Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    1,693

    Default tried some new boat compount/polish/wax.

    So I decided to try some new gel coat cleaning products from Chemical Guys and I really liked it. I've used a lot of different stuff over the years and had good success with a lot of them but I'm always looking for the something better. This is the stuff i used and a before and after picture.
    Attached Images Attached Images
    Scott
    2021 Craz
    2007 Mobius LSV
    1997 Sea Ray 190

  2. #2
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    1,693

    Default

    here are a few final ones.
    Attached Images Attached Images
    Scott
    2021 Craz
    2007 Mobius LSV
    1997 Sea Ray 190

  3. #3
    Join Date
    May 2013
    Location
    Fairfax, VA :(
    Posts
    925

    Default

    Looks great! What do you do about cutting with the stickers? Do you go over it with the cutting compound or do you do around them? Same question for the wax. My hull needs a good touch up as it was never done by the previous owners and it needs it.
    2007 XLV Gravity Games
    Full Wake Makers upgraded ballast and pumps
    1,100 in each rear locker
    1,180 in front
    OJ 1435 prop, 325 EFI Indmar Assult.
    Fresh Air Exhaust
    SuckG8
    Bunch of other crap

  4. #4
    Join Date
    May 2013
    Location
    Spokane, WA
    Posts
    568

    Default

    Looks sharp!


    Sent from my iPhone using Tapatalk
    2013 LSV Red/White

    1100lb upgrades in each rear locker!
    Stock 500 Bow ballast
    650IBS
    Manual Flow equipped

    Boards
    Hyperlite Hi-Fi "The Illest"
    CWB AMG Carbon
    Phase 5 Razz
    Byerly Volt
    4.6 Ronix Koal Fish
    Phase Five Scamp (kiddos)

  5. #5
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    1,693

    Default

    i just went right over the stickers with the compound and the wax. Didn't have any problems.
    Scott
    2021 Craz
    2007 Mobius LSV
    1997 Sea Ray 190

  6. #6
    Join Date
    May 2013
    Location
    Fairfax, VA :(
    Posts
    925

    Default

    Mine are in decent shape but they probably need to go. Just wondering for the future once I do replace them. I started removal already.
    2007 XLV Gravity Games
    Full Wake Makers upgraded ballast and pumps
    1,100 in each rear locker
    1,180 in front
    OJ 1435 prop, 325 EFI Indmar Assult.
    Fresh Air Exhaust
    SuckG8
    Bunch of other crap

  7. #7
    Join Date
    Sep 2015
    Location
    UT 6000'
    Posts
    1,481

    Default

    DAMN! That looks great. Now get some product to keep it that way after a day on the water.
    DFTR Josh
    Supra/Moomba
    www.marine-products.com (Discount Code: DFTR-1)

  8. #8
    Join Date
    Dec 2012
    Location
    Ennis, TX
    Posts
    841

    Default

    How did you apply and remove? By hand or buffer?


    Sent from my iPhone using Tapatalk
    Shane
    2016 Supra SE
    EXILED
    6 XM9 Tower
    6 Wetsounds XS650 Cabin
    1 EXILE BIG 12 DVC 2000 watt in a ported box
    1 XM 15.4
    XI 1500.1
    2 MX 30.2
    Wetsounds 420 EQ
    EXILE Blue tooth EXBT4
    Blue LEDs

  9. #9
    Join Date
    Jun 2015
    Location
    Fargo
    Posts
    29

    Default

    I also use Chemical Guys marine products and really like it. Bought my buffer kit from them as well. Both the buffer and their products are really easy to use.
    2023 Craz
    2013 LSV

  10. #10
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    1,693

    Default

    I used a porter cable buffer for the compound and polish. I removed by hand. The wax I applied and removed by hand.
    Scott
    2021 Craz
    2007 Mobius LSV
    1997 Sea Ray 190

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •