Moomba factory white electrical connectors

[Stazi]

Does anyone know the brand of white electrical connector that Moomba uses on these boats?. I'm trying to find some so that I can use them to connect up to the factory speaker harnesses. I have looked them over and cannot locate a name or any part number that I could google, and therefore don't know how to find who makes them and where to buy them from. Any help would be greatly Appreciated.

[New Guy]

Picture?

Sent from my SM-G935R4 using Tapatalk

[Stazi]

Sorry, I forgot to take one, but they're used all over the boats. Even as far back as my 2004 Mobius, so I'm pretty sure everyone with a Moomba has these big white electrical connectors, especially on the stereo components. But they use them for general wiring too.


Sent from my iPad using Tapatalk

[Stazi]

Here's a pic I found on google that someone else took

[sivs1]

there are a few Radio Shacks still around, they would have something similar if you are unable to find the company SC uses.

[dusty2221]

I know what plug you are talking about but cannot remember if the boat ends in the male or female connection. Snap a pic of the pigtail you have and I bet it can be found. You are looking for something like this, just not certain which end and what shape your connectors need to be

http://www.ebay.co.uk/itm/ALPINE-8-P...-/111824006628

http://www.ebay.com/itm/8-Pin-Speake...-/271929277887

[Stazi]

Dusty. It's not those. For example on the Craz you have a 4-pin plug for the bow speakers and the two other 4-pin plugs, one male, one female that connects the port in-boat to the wires that run around the bow back to the stereo, then there is a similar pair of connectors on the starboard side that connect those speakers to the stereo. I want to buy 3 of these plugs so I can connect my amp to the port and starboard in-boats and also to the bow speakers. Yes I could cut the connectors of Florida and crimp all the wires to extensions to the amps, but the plugs would be cleaner. IMO
For the towers, the harness coming out of the Roswell tower already has 8 Deutsch pins, so I am getting an 8 pin kit to connect those to the amp as well


Sent from my iPhone using Tapatalk

[dusty2221]

Yeah, I had the tower in mind. 8 pin is what I was thinking you were needing.

[gregski]

I'd have to look to be sure but I'd guess it's Molex mini-fit. They are very common and there are other compatible brands like Amp, etc - like how "Kleenex" means tissue. There are some other similar product lines like Amp Mate-N-Lok, so you might have to take a few measurements and look at drawings.

[Crane man]

I'd have to look to be sure but I'd guess it's Molex mini-fit. They are very common and there are other compatible brands like Amp, etc - like how "Kleenex" means tissue. There are some other similar product lines like Amp Mate-N-Lok, so you might have to take a few measurements and look at drawings.

I agree. They are molex connectors, radio shack did sell them along with pin removal tools and crimpers.