Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2016
    Posts
    4

    Default Solenoid Help!!!

    My ballast were taking on water (with the switch in the correct position) so I went and bought the replacement Orbit vales. However, the old solenoids have the special clip style adapter. The wires are not marked. I was going to cut and splice, but how do I know which one is which?? Help is appreciated!!!!

    Thanks,
    Rob

  2. #2
    Join Date
    Aug 2012
    Location
    Morganton, NC
    Posts
    208

    Default

    It doesn't matter which goes to which.

    Sent from my Nexus 6 using Tapatalk
    2008 OBV
    325 EFI with closed cooling
    Gravity III with 750's in the rear, 400 stock floor, 750 IBS
    Servo valve ballast upgrade
    Wetsounds Rev10
    JL Amps, WS420BT

    2000 Outback LS <-- Sold!!!
    310 Carb Direct Drive
    800# Rear Locker
    750# IBS (should have kept this for the OBV)
    Dual Batteries with 2 Bank Charger System
    Kenwood Head with Remotes
    Too many hours restoring exterior from prior negligence to count!

  3. #3
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,069

    Default

    Ditto san!
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  4. #4
    Join Date
    Sep 2016
    Posts
    4

    Default

    Thanks guys!!!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •