Results 1 to 7 of 7
  1. #1

    Default bigger wake plate

    any one have an older lsv (0 that has tried installing a trim tab on both sides of the transom like the new moombas have? any information on performance, parts, etc.. thanks

  2. #2
    Join Date
    May 2014
    Location
    Palm Desert, CA
    Posts
    1,541

    Default

    Quote Originally Posted by mikepo26 View Post
    any one have an older lsv (0 that has tried installing a trim tab on both sides of the transom like the new moombas have? any information on performance, parts, etc.. thanks
    You mean a surf system? Wake plate is in the middle. Surf tabs are on the sides . Oem is www.Wakelandmfg.com or you can go the wavecontrol route (GSA) from wakemakers.com or build a $50 suck gate.



    Sent from my iPhone using Tapatalk
    2015 Mondo

    Upgraded 900lb Rears, 250lb under Port Seat & 750lb IBS

    2079 Prop

    Auto Flow 2.0

    Kicker Stereo: 2 800.5 amps, 2 400.2 amps, 4 KM8 towers , 4 KM10 subs & 8 KM6 cabin speakers

  3. #3
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    788

    Default

    Quote Originally Posted by mikepo26 View Post
    any one have an older lsv (0 that has tried installing a trim tab on both sides of the transom like the new moombas have? any information on performance, parts, etc.. thanks
    I put wave control from Wakemakers on my 2008 lsv
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  4. #4
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    3,065

    Default

    For a surf wave, what is your best setup?

  5. #5
    Join Date
    Nov 2009
    Location
    Nebraska
    Posts
    742

    Default

    Quote Originally Posted by moombahighrider View Post
    I put wave control from Wakemakers on my 2008 lsv
    How do you like it?
    2016 Mojo
    2010 Moomba LSV-Sold

  6. #6
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    I have the Wave Makers Wave Control on my Mojo as well.

    Love it.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

  7. #7
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    788

    Default

    Quote Originally Posted by MJHSupra View Post
    For a surf wave, what is your best setup?
    Honestly, I don't have it dialed in completely yet. I didn't get a ton of time on the water this summer, and what time I did get wasn't as much surfing as I would have liked.

    Basically, I am still figuring out what are the best angles for the plates. I have them at around the 15 degree mark (suggested by Wakemakers) when deployed, but there are so many variables, that I need more systematic time testing to be sure that is best.

    With mike mandley's help, I tried not using my IBS at all and that helped quite a bit. I guess the plate creates enough lift off the back corner that the IBS isn't as important as it used to be. Having said that, I still don't have the push I would like. It's a good wave, just not as big and long as my listed setup. I'm thinking that I have too much non-surf-side weight and that might be robbing me of some push, but that means I will be going more listed, which is what the wave control system was supposed to do away with.

    The system definitely makes a difference and it's fun to play with switching sides and watch the wave transfer. The technology is legit and it works really well. I wish someone else had this system dialed on an lsv and could tell me exactly what weight and settings they used. I don't love being the guinea pig, but oh well- someone's got to do it.

    Hopefully I have more time next summer to get it sorted out the way I want it- I'm a ocean wave surfer from Australia so want the wave as large and powerful as possible, but that's asking a lot.
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •