Results 31 to 40 of 93
-
01-10-2018, 01:18 PM #31
Do the newer raptor motors use the same water pump impeller as the old assault 325s?
Sent from my iPhone using TapatalkDavid
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
01-26-2018, 02:45 PM #32
Do the Indmar v-drives/transmissions that come on the newer raptor 400s have a screen or filter that needs to be removed to clean during servicing?
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
09-06-2018, 04:31 PM #33Junior Member
- Join Date
- Sep 2018
- Posts
- 3
Boy quick question.
2018 Moomba craz I have removed 3 blue wing nuts from 1 from
Transmission and other two from heat exchanger I have a gargen
Hose connection from my manifolds would that be the 2 wing nuts I’m missing
Or is there 2 blue wing nuts I can’t find
-
09-06-2018, 04:52 PM #34
There is 5 drain points. 3 are blue wingnuts, one is the hose that connects the exhaust manifolds together, and the last is the water pump impeller housing
Sent from my iPhone using TapatalkDavid
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
09-06-2018, 07:00 PM #35Junior Member
- Join Date
- Sep 2018
- Posts
- 3
-
09-06-2018, 08:28 PM #36
I don’t but it’s just the cover of the impeller housing itself. The housing is black and the cover is held on by 4 5/16 brass bolts (they may have black paint on them). It stick off the front of the motor (towards the back of the boat). There should be a stick on it that’s blue and says like 3 of 5 or something like that.
Sent from my iPhone using TapatalkDavid
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
09-06-2018, 09:10 PM #37
-
09-06-2018, 09:12 PM #38
Bingo, remove the 4 5/16 bolts. There is a white foam gasket that seal the cover and it will stick so you may have to pry the cover off once the bolts are out
Sent from my iPhone using TapatalkDavid
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
09-06-2018, 09:15 PM #39
Torque spec on reinstall?
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
09-06-2018, 09:28 PM #40David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD