Results 1 to 10 of 41
-
08-04-2016, 05:39 PM #1Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Whats everyone working on this season?
I've been working on 1/2 cab, drifter/180 and trying to add in a body viral..
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
08-04-2016, 05:42 PM #2
Just the 360. I haven't had enough time.
2007 XLV Gravity Games
Full Wake Makers upgraded ballast and pumps
1,100 in each rear locker
1,180 in front
OJ 1435 prop, 325 EFI Indmar Assult.
Fresh Air Exhaust
SuckG8
Bunch of other crap
-
08-04-2016, 06:45 PM #3Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Best advice I can give is keeping the board flat and wide stance makes spins easier. Try moving your feet towards the middle of the board. When I'm carving I have my toes near the edge of the board which makes it easier to make an edge and carve, but when trying to 360/180 it causes me to catch an edge.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
08-05-2016, 09:50 AM #4
Thanks for the advice. I was looking at that video last month. It is a really nice view. Everyone else records from down low and you can't really see what is going on. Here you can see everything that is happening. I sent this to my brother-in-law last month and told him to try it this way. We are having a competition to see who can do the 3 first. So far he is ahead and I need to get back on it. He hasn't done it yet but he is really close thanks in part to your video. He is using the Hammerhead also. Great board.
I got the lip slide down and a couple of other things. I didn't know I had the lip slide until someone recorded it. I thought I was only turning the board about 45* but I was getting almost the full 90*. I really need to get my Go Pro on the boat.Last edited by 5:00; 08-05-2016 at 09:52 AM.
2007 XLV Gravity Games
Full Wake Makers upgraded ballast and pumps
1,100 in each rear locker
1,180 in front
OJ 1435 prop, 325 EFI Indmar Assult.
Fresh Air Exhaust
SuckG8
Bunch of other crap
-
08-05-2016, 09:50 AM #5
I am just starting to try a 360 most end in a faceplate
https://www.dropbox.com/s/kbo0wpc5wo...00003.mp4?dl=0
Sent from my SM-T330NU using Tapatalk2016 Craz
-
08-05-2016, 09:53 AM #6
Keeping in the wave is where most of us have the issue it looks like.
2007 XLV Gravity Games
Full Wake Makers upgraded ballast and pumps
1,100 in each rear locker
1,180 in front
OJ 1435 prop, 325 EFI Indmar Assult.
Fresh Air Exhaust
SuckG8
Bunch of other crap
-
08-05-2016, 10:24 AM #7Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Whats everyone working on this season?
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
08-05-2016, 10:25 AM #8Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Whats everyone working on this season?
I record and review every set, it really helps.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
08-05-2016, 01:40 PM #9
I am going to have to try moving my toes in from the edge more to the center of the board. I have only ridden one out in hundreds of tries. Since I started getting a wider stance and lower to the board I am getting around almost every time. But, sometimes I catch an edge. I'll have to practice riding off the edge and then try a few and see where it goes. Unfortunately we are taking a few days off cuz several of my crew have ear infections after a week straight on the water.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
08-05-2016, 07:05 PM #10
I'm working on losing 20lbs but having about as much luck at that as spinning a 360
'06 Supra Launch 20SSV-gone but never forgotten