Well it was time to fix up the trailer as it was starting to look pretty beat up. The lights were dim, the guide posts were vibrating and the wheel wells were bent.

I've replaced the lights with all new led lights and new wires. Welded the posts and hammered out the wheel wells. It's been primed and painted after a sandblast and sand.

Thursday new brake lines and check the hubs, bearings and bleed the brakes. She's going to be like new.

Not sure how to bleed the brakes on this trailer. Any insight would be helpful.

Also I'm wondering what you guys have used as for materials for the side steps and on top of the wheel wells.




Sent from my iPhone using Tapatalk