Results 1 to 1 of 1
Thread: Drilling Tower
-
07-15-2006, 04:35 PM #1Member
- Join Date
- Aug 2005
- Location
- Las Vegas, Nevada
- Posts
- 56
Drilling Tower
I have read quite a few topics on here about drilling the tower for speakers and lights. i will be embarking on my own project here in the next couple weeks. Does anyone know if there are any limiation to drilling into the moomba towers? For example, the Monster tower installation instruction have specific dimensions to stay away from welds and cross members. It sounds like there are several people out there that have drilled holes in their towers and i haven't heard of any collapses. May not be a big issue.
Similar Threads
-
Drilling through fiberglass...any advice?
By iaonbb in forum General ChatReplies: 4Last Post: 03-05-2007, 04:48 PM -
Tower Speakers and Tower Lights
By BigRed0803 in forum Moomba ClassifiedsReplies: 5Last Post: 02-19-2006, 09:46 AM -
Tower bolt vibrated loose from tower!
By sailnfast in forum Service & RepairReplies: 6Last Post: 05-20-2005, 02:21 PM -
Drilling into fiberglass
By carsondoc in forum Boat OwnersReplies: 4Last Post: 04-20-2004, 11:36 AM -
Wakeboard Tower - Monster Tower
By RickMcD in forum General ChatReplies: 0Last Post: 06-27-2003, 08:30 AM