Results 1 to 9 of 9
Thread: Growling vibration noise.
-
07-01-2016, 05:55 PM #1
Growling vibration noise.
No I'm not running factory prop. 😀 Acme 1617 2013 LSV. Here's a video of it in drivers seat. You can really notice it at surf speed (3k rpms) when sacked out. Seems like it's only apparent when heavily weighted.
Sent from my iPhone using Tapatalk2013 LSV Red/White
1100lb upgrades in each rear locker!
Stock 500 Bow ballast
650IBS
Manual Flow equipped
Boards
Hyperlite Hi-Fi "The Illest"
CWB AMG Carbon
Phase 5 Razz
Byerly Volt
4.6 Ronix Koal Fish
Phase Five Scamp (kiddos)
-
07-01-2016, 05:57 PM #2
Growling vibration noise.
Another video from rear and harder to hear from water and engine. I do have FAE so it's not as loud.
Sent from my iPhone using Tapatalk2013 LSV Red/White
1100lb upgrades in each rear locker!
Stock 500 Bow ballast
650IBS
Manual Flow equipped
Boards
Hyperlite Hi-Fi "The Illest"
CWB AMG Carbon
Phase 5 Razz
Byerly Volt
4.6 Ronix Koal Fish
Phase Five Scamp (kiddos)
-
07-01-2016, 08:28 PM #3
-
07-01-2016, 11:38 PM #4
Growling vibration noise.
Sent from my iPhone using Tapatalk2013 LSV Red/White
1100lb upgrades in each rear locker!
Stock 500 Bow ballast
650IBS
Manual Flow equipped
Boards
Hyperlite Hi-Fi "The Illest"
CWB AMG Carbon
Phase 5 Razz
Byerly Volt
4.6 Ronix Koal Fish
Phase Five Scamp (kiddos)
-
07-01-2016, 11:52 PM #5
Growling vibration noise.
Wtf is going on. Should be sound and none are working.
Sent from my iPhone using Tapatalk2013 LSV Red/White
1100lb upgrades in each rear locker!
Stock 500 Bow ballast
650IBS
Manual Flow equipped
Boards
Hyperlite Hi-Fi "The Illest"
CWB AMG Carbon
Phase 5 Razz
Byerly Volt
4.6 Ronix Koal Fish
Phase Five Scamp (kiddos)
-
07-02-2016, 09:21 AM #6Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Growling vibration noise.
That's the sound of lots of ballast..lol
With a fae you hear a lot of stuff others can't..http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
07-02-2016, 01:28 PM #7
I would start with making sure your drive shaft bolts are tight. They do work loose. Check at least twice a year. Then check the prop and shaft and the alignment.
We scraped the bottom slightly the other day when my son was idling near the boat ramp. I felt vibration above 3500 RPM. Figured it was the prop. Saw not much of anything-- maybe a tiny ding -- so I sent it in. They said one blade was pushed back and it would be hard to tell with your eye. $158 later it's fixed.My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
07-02-2016, 07:11 PM #8
Growling vibration noise.
I will check all that. Least sound is working now.
Sent from my iPhone using Tapatalk2013 LSV Red/White
1100lb upgrades in each rear locker!
Stock 500 Bow ballast
650IBS
Manual Flow equipped
Boards
Hyperlite Hi-Fi "The Illest"
CWB AMG Carbon
Phase 5 Razz
Byerly Volt
4.6 Ronix Koal Fish
Phase Five Scamp (kiddos)
-
07-03-2016, 07:38 AM #9
Mine make strong vibration that shakes the steering wheel when i drive through heavily weeded area and i get weed tangled in prop. Put in reverse and voila, gone
Sent from my SM-G935P using Tapatalk2020 Supra SL 400
2015 Moomba Mojo(Sold)
2018 Yamaha Waverunner(Just to fool around)
2018 F150 Lariat
sport edition, 3.5lt ecoboost