Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2016
    Posts
    3

    Default Ballast pump replacement 2012 OBV

    I am new to this forum, but I am in need of some help. First season with a 2012 OBV and my center ballast pump stopped working. I assume this is a relatively easy replacement but how do I get to the darn things? Is there a trick to getting the panel in the rear compartment off? Any help would be greatly appreciated.

  2. #2
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default Ballast pump replacement 2012 OBV

    I think there are 2 screws in a bracket on the floor and then you pull the panel out from the bottom. It's secured at the top by a Z clip/bracket that goes behind the fiberglass lip of the ski locker.

  3. #3
    Join Date
    Jun 2016
    Posts
    3

    Default

    Thanks.

    No bracket on floor.
    Dealer fastened at top with a screw and buried it into the wood & under carpet. Able to force it through and then tip it back to release the z- clips. Definitely a bad pump but at least I can replace it now.

    Appreciate the help

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •