Results 1 to 4 of 4
Thread: Engine panel divider
-
05-17-2016, 09:50 PM #1
Engine panel divider
If you want an option besides wake makers kit. I went to Home Depot and purchased c channel aluminum, stainless steel hardware, and can of good spray paint. Total cost of $16 bucks. So far so good. I will get a full bag picture this weekend.
Sent from my iPhone using Tapatalk2017 Supra SA
-
05-18-2016, 11:14 AM #2Senior Member
- Join Date
- Oct 2013
- Location
- Ft. Collins, CO
- Posts
- 688
Looks good but you do need to add some more bolts. You need to have a bolt at each end of the beam (i.e. top and bottom).
2007 Mobius LSV
1989 Sanger Skier DX - sold
-
05-18-2016, 11:10 PM #3
I bet you are right. I bought extra thinking i may have to add but wanted to give it a test run first.
2017 Supra SA
-
05-19-2016, 04:18 AM #4Senior Member
- Join Date
- Oct 2013
- Location
- Ft. Collins, CO
- Posts
- 688
Basic mechanics/statics here. You are making a beam that must be fixed at the end points, a middle bolt doesn't really do anything for you here. Here's an exaggerated pic of your setup:
Untitled.jpgLast edited by gregski; 05-19-2016 at 04:22 AM.
2007 Mobius LSV
1989 Sanger Skier DX - sold