Results 1 to 10 of 28
Thread: Backrest support
-
05-03-2016, 09:31 PM #1
Backrest support
Hey guys I was able to get my backrest done. I don't have it mounted in the boat yet but I have some pictures. I will gladly build these for other members. Your dealer supplies the rest portion this is just the bracket and hardware. There are two options:
Polished Stainless $275
Raw Steel $200
All of them come with the correct stainless fasteners and backing plates.
I don't have caps on in the picture because they haven't arrived yet. Hopefully I'll have in boat pictures by the weekend.
Sent from my SM-G935R4 using TapatalkLast edited by New Guy; 05-03-2016 at 09:33 PM.
-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
-
05-03-2016, 10:24 PM #2
Nice bro, I'll be placing an order with you on it.
I'll take a raw steel.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
05-03-2016, 10:38 PM #3
I'd order one too if I could convince my dealer that the seat back does not cost $1500. Might have to source the part from another dealer.
Sent from my SM-G900W8 using Tapatalk2016 Craz.
Enzo bags.
-
05-03-2016, 10:57 PM #4
Matt I can get you a seat back for $160.
Sent from my SM-G935R4 using Tapatalk-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
-
05-03-2016, 11:19 PM #5
Backrest support
Very nice. Does it come with backrest portion?
Sent from my iPhone using Tapatalk2013 LSV Red/White
1100lb upgrades in each rear locker!
Stock 500 Bow ballast
650IBS
Manual Flow equipped
Boards
Hyperlite Hi-Fi "The Illest"
CWB AMG Carbon
Phase 5 Razz
Byerly Volt
4.6 Ronix Koal Fish
Phase Five Scamp (kiddos)
-
05-04-2016, 12:31 AM #6
-
05-04-2016, 07:56 AM #7Senior Member
- Join Date
- Feb 2016
- Posts
- 158
Price on both seat backs.
2016 Moomba Craz
Gunmetal W/ flake
Atomic Orange Accent
Black Deck and Hull
-
05-04-2016, 12:25 PM #8
Guys this is for the bracket and hardware you have to source the cushion portion at you dealer. They should run about $150.
-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
-
05-05-2016, 08:01 AM #9
Great Work, Mark! Love to see the rest of the hardware and the clearance with the seat swivel once the back rest is fully mounted.
It appears we have the same interior color combo.2014 Mojo Surf
2013 Mojo Sold
2010 LSV Sold
2002 OB LSV Sold
-
05-05-2016, 01:36 PM #10
You might look into calling AWS <active water sports> Ask for Jeremy, tell him I referred you, the seat is about 120 through them.
You need your boat hull # so he can make sure the upholstery is the correct patterns.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]