Results 11 to 12 of 12
Thread: Steering
-
02-02-2010, 09:42 PM #11
i have fixxed lots of cables. i did put a thread up with picture how to fix and lube regulary.my boat is not here so i cant send more pictures look in the old threads and it will be there i drilled a hole in the cable and injected plid down the cable when turning back and forth. cables will build up with rust over time and get tighter. my boat i had to steer with two hand all the time now its one finger
-
04-04-2010, 03:20 PM #12Junior Member
- Join Date
- Apr 2010
- Posts
- 1
Replacing steering cable
From what I have read this is a common problem. We have an 05 Outback with only 80 hours. We went to take the boat out this weekend and it is near impossible to steer. From previous threads it looks like these can be replaced at home. I saw one thread that there were posted picts on how to do this but they are no longer avaliable. I am having trouble even getting the floor up to see how difficult a task this is going to be. Is there any advice you can give me as to if this is worth my time, trouble and frusterations or should I just take it in and pay the $500?
Similar Threads
-
steering troubles
By mfiduccia in forum Service & RepairReplies: 1Last Post: 05-22-2007, 08:52 PM -
steering chatter Help Mr. BR
By boomerang1 in forum Service & RepairReplies: 6Last Post: 06-27-2006, 12:40 AM -
steering
By old geezer in forum General ChatReplies: 1Last Post: 09-06-2004, 10:23 PM -
steering
By ProXman in forum Service & RepairReplies: 1Last Post: 06-20-2004, 10:56 AM -
Steering Failure
By in forum Boat OwnersReplies: 4Last Post: 08-26-2003, 02:17 AM