Results 1 to 3 of 3
Thread: Redo
-
04-22-2016, 09:28 AM #1
Redo
So with buying a new 1500$ ECU for the boat I have decided to rewire my racks in the boat. When I first wires up my amps and stopped by a local car audio shop and they sold me cheap distribution blocks that worked with my 1/0 gauge wire. Well once my boat crapped out and noticed a battery terminal had melted off, I decided that it was time to revamp my setup with the help of mike.
I dropped those crappy distribution boxes, and the crappy crimps to some better stuff. One of the pics you can see was what happens to one of my 1/0 gauge wires that, I guess, didn't sit all the way in on the box and slowly started to come out.2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
04-22-2016, 09:57 AM #2
Just to be thorough, make sure you are not using CCA wire (Copper Clad Aluminum). With CCA wire these type of issues will be continuous.
-
04-22-2016, 11:12 AM #3
Yeaa I'm going to go with knukonceptz with OFC
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)