New drivers seat for the XLV needed

[jmvotto]

I will get you guys some pics, I just used 3/4" plywood to see if we would like it before I went and bought the steel to make this project happened but it is for sure going to happen now that we have the option to spin! I can't spin it all the way around unless I move the seat all the way forward, and ive normally got it all the way back but I wasn't wanting to swivel 180 just 90 was fine with me, and it doest hit the throttle or the side wall so I'm very happy.

did you use the angled swivel? and is it level?

[gpd005]

I did use the angled one and it seems to sit perfect. I totally forgot about pics last night but i'll get them tonight.

[gpd005]

IMG_9810.jpgIMG_9811.jpgIMG_9812.jpg

I think for now we are just going to paint the wood that you can see but you get the idea of what we did here. One wooden plate to the original rails that the seat slides on, then one wooden plate to the seat base, then the swivel in the middle. I'm going to have some steel plates made but this will work for right now. We also did the miner's moss for carpet replacement and we love how that has turned out.

[Fastest1]

Are you using the Miner's Moss in the version with the backing or without?


Sent from my iPhone using Tapatalk

[jmvotto]

Probably don't even need the bolster now , with that extra height

[gpd005]

Probably don't even need the bolster now , with that extra height

you are right but I still use it.

[gpd005]

Are you using the Miner's Moss in the version with the backing or without?


Sent from my iPhone using Tapatalk

I used it without the backing and it seems to be working.