Results 1 to 4 of 4
Thread: 99 Kanga repair
-
05-29-2003, 12:21 PM #1Junior Member
- Join Date
- May 2003
- Location
- Nashville, TN
- Posts
- 9
99 Kanga repair
I just purchased a nearly brand new Kanga from a seller in Texas. It only has 44 hours and is in immaculate condition.
After Memorial Day weekend, my temp gague went to the max, 240 and my engine wouldnt crank. It all happened rather quickly on Monday evening after a flawless weekend on the lake.
Where is a reputable place around NAshville, Tn I can take this to get someone to look at it and give me an honest estimate? Any ideas are extremely appreciative.
PS-If you have had a similar experience with your moomba, please let me know wht the outcome was or what you think it could be!
Thanks in advance,
Jason
-
06-13-2003, 12:24 AM #2Junior Member
- Join Date
- Apr 2003
- Location
- Bend, Oregon
- Posts
- 9
99 kanga overheat
Check the water pump impeller and the hoses for collapse. Also check the fresh water intake for blockage behind the grate. Good Luck!
Living Well Is The Best Revenge!
-
06-13-2003, 12:26 AM #3Junior Member
- Join Date
- Apr 2003
- Location
- Bend, Oregon
- Posts
- 9
99 kanga overheat
All of the Items mentioned previously are easy to fix and check. A screw driver will do most all of it.
Living Well Is The Best Revenge!
-
06-13-2003, 03:26 PM #4Member
- Join Date
- Jan 2003
- Location
- Nashville
- Posts
- 57
Ski Hut in Hermitage is the Moomba dealer now. 872-2754. Ask for Lee. I have had good luck with them. Which lake do you use? If you see my yellow Moomba on Old Hickory or Center Hill, flag me down.
Similar Threads
-
Gel Coat Repair?
By gsi09907 in forum General ChatReplies: 4Last Post: 07-16-2007, 08:12 PM -
Vinyl Repair
By outback 4 in forum Service & RepairReplies: 1Last Post: 04-30-2007, 04:52 PM -
repair maunal
By SkiBoy in forum Service & RepairReplies: 3Last Post: 04-08-2006, 06:04 AM -
repair
By Eagle River in forum Service & RepairReplies: 0Last Post: 08-22-2005, 06:37 PM -
service and repair
By NLindellDC in forum Service & RepairReplies: 0Last Post: 08-31-2004, 12:31 PM