Results 1 to 5 of 5
Thread: Daisy Chained Amps
-
03-01-2016, 11:06 AM #1
Daisy Chained Amps
Question, I currently have an Exile 30.2 running 4 xM9s on my tower. I am adding a 3rd pair of XM9s and another 30.2 to run them. My current 30.2 is controlled by my ZLD. Can I daisy chain the amps using the RCA out on my current 30.2 to the new 30.2 RCA in? If so I assume both would be controlled by the ZLD tower control. Or, should I use a Y splitter to split the ZLD signal to the 2 30.2 amps? Seems easier to just daisy chain them since they are both tower amps? Thanks for you input.
Shane
2016 Supra SE
EXILED
6 XM9 Tower
6 Wetsounds XS650 Cabin
1 EXILE BIG 12 DVC 2000 watt in a ported box
1 XM 15.4
XI 1500.1
2 MX 30.2
Wetsounds 420 EQ
EXILE Blue tooth EXBT4
Blue LEDs
-
03-01-2016, 11:37 AM #2
I have a splitter on my ws420 for my 2 amps on my 4 tower speakers. It works great.
2015 Supra SG 450 Fire Red Metallic
Wetsounds and MMATS
2015 Mojo
2014 LSV
2006 Tahoe Q4sf
-
03-01-2016, 11:44 AM #3
Don't split the RCA, the 30.2 has an output. So go from ZLD to amp1, then out from amp1 into amp 2. All 3 of my 30.2's are linked this way.
2006 Supra 20 - Sold
2006 Supra 24 Gravity Games - Sold
2015 Supra SE450 - Sold
-
03-01-2016, 11:51 AM #4
Daisy Chained Amps
Shane
2016 Supra SE
EXILED
6 XM9 Tower
6 Wetsounds XS650 Cabin
1 EXILE BIG 12 DVC 2000 watt in a ported box
1 XM 15.4
XI 1500.1
2 MX 30.2
Wetsounds 420 EQ
EXILE Blue tooth EXBT4
Blue LEDs
-
03-01-2016, 12:25 PM #5
Agree with Dusty, I have my both my 30.2 on my tower wired that way.
You do have to tinge each amp separately though. At least I do because one has 4 9s the other has 2.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]