Anyone seen or tried Ronix Wakesurf Shaper on Moomba boats

[mikenehrkorn]

That's the ramp I got but I just got one.....do you really need two?

[costanza]

That's the ramp I got but I just got one.....do you really need two?

I think it increases the angle, and creates bigger resistance. Brings it closer to the size of the Ronix one... Also gives better surface area for Velcro to attach to boat... When does your boat go in the water?

[mikenehrkorn]

According to the specs I found, the Ronix version is pretty close to the size of the skateboard ramp already.

Ronix: 20" x 15" x 10"

skateboard ramp: 28" x 16" x 8"

[costanza]

According to the specs I found, the Ronix version is pretty close to the size of the skateboard ramp already.

Ronix: 20" x 15" x 10"

skateboard ramp: 28" x 16" x 8"

hhhmmmm.... That's smaller than I thought the Ronix was... I've written someone that sells them here, to see if they can measure (not sure if they carry them in stock)... Maybe one ramp is all you need? I'll order 2, and maybe try them both to see what works better...

[kaneboats]

Please keep us posted. I made my first gate late last season and would like to improve it a bit if possible.

[costanza]

According to the specs I found, the Ronix version is pretty close to the size of the skateboard ramp already.

Ronix: 20" x 15" x 10"

skateboard ramp: 28" x 16" x 8"

So heard back from a reseller and he says Ronix ramp is 21 x 11 x 10... One ramp may be all you need... For the price and simplicity to setup I'll still pick up a couple and try it to see if 1 or 2 work better...

[snyderaaron]

Just tried wakeshaper today. First it will probably take some time to fine tune, but it did pretty good. My setup was having my 1000lb bag in the bag full, center and ibs full, wakeplate all the way up and speed 10.4. One problem i had was removing the shaper and the shims!

[costanza]

Just tried wakeshaper today. First it will probably take some time to fine tune, but it did pretty good. My setup was having my 1000lb bag in the bag full, center and ibs full, wakeplate all the way up and speed 10.4. One problem i had was removing the shaper and the shims!

Good to hear... Any pics of it on the boat to see where you placed it? Or wave comparison with usual setup vs wake shaper?

[snyderaaron]

Didn't get that far into it, was more concerned staying warm with the 44 degree water. Wave comparision looked better and I almost landed my first 360 with it.

[costanza]

Wave comparision looked better and I almost landed my first 360 with it.

SWEET!!! Kudos to you for getting in the water!!!!! We still have 2 feet of ice on our lake...
There's a curved contour line on the 2013 LSV that looks like it curves down right where I'd want to put the wedge, so just curious where you put the Velcro tape on yours (if it has similar contour).
I'm looking forward to trying this out, sadly not till around June...