Cutting 4" holes in fiberglass seat bases.

[trayson]

I drilled mine with my 18v Ryobi, took about 30 seconds. I think you need a better hole saw.

There ya go. I've been using 18v Ryobi's... so I guess it's the hole saw for sure.

[parrothd]

You have the drill spinning the right direction? Lol..

[trayson]

You have the drill spinning the right direction? Lol..

As long as I do the drilling in the Northern Hemisphere, yes, but if I take my boat to Australia, I'll probably have to get one of those right hand drive drills.

I mean, my drill IS pretty amazing. I can't imagine why it's taking so long... But you should see my biceps now...

[parrothd]

Just checking, running it backwards won't cut like you describe..

[trayson]

Just checking, running it backwards won't cut like you describe..

I've run it forwards, backwards, and everything but sideways. LOL.

[Dusty's Mom]

Go figure, trayson can't find the hole.

Sent from my SM-G928V using Tapatalk

[MJHSupra]

My neighbor came over the house asking to borrow my 1/2" drill. I give him the drill and ask him what the project was. His response was using a hole saw but having trouble.

I walk over to his house, pick up his drill, noticed it was in reverse. Ouch!

Plus, he was using crappy bits/blade kits from one of those discount tool places. After 1-2 holes it was done. F'ing junk.

Trayson - a 1/2" corded hammer drill does NOT work? Damn, is that boat made of Brazilian walnut?


Sent from my iPhone using Tapatalk

[dusty2221]

Go figure, trayson can't find the hole.

Sent from my SM-G928V using Tapatalk

Mom said he tried to put the 1/2" hammer on her, same story....drill a little one night, come back the next. After multiple nights the job still wasn't done

Sent from my SAMSUNG-SM-G920A using Tapatalk