autoflow

[jstenger]

You will have to contact your local dealer about upgrading. We don't sell parts like that directly from the factory. With the AutoFlow 2.0 plates, if you don't change the upper arm, you can bend the smaller AutoFlow 1 upper arm. We did quite a bit of testing and that is why we went with the larger upper mount on the 2.0 system.

I have a 2014 LSV. Can you provide the part numbers for the AutoFlow 2.o parts or kit? I like going to the dealer with part numbers instead of waiting for them to search. Other than adding the switch to the dash, can the dash computers in the 14's be flashed to match the 15's and 16's? Thanks.

[goose]

On the upper arms, it does use the same hole pattern. The arm itself is just bigger. On the 2014 LSV, unfortunately that kit number doesn't exist. The LSV has it's own hinge assembly that is unique to the other boats. We do have a kit for AutoFlow on 2014 and 2015 LSV. However, like I said, we didn't do the LSV for 2016 so there is no AutoFlow 2 kit for the LSV. Again, it is theoretically possible, but it will require parts from an AutoFlow kit and an AutoFlow 2.0 kit. The dash can be reprogrammed, but obviously getting the parts you need without the parts you don't need might be quite difficult and could be costly. Again, you will just have to contact your local dealer and work through that one. They might be able to get ahold of our vendor that is doing that for us and work out something, but I can't promise you anything. We do our absolute best to try and make sure things are as retrofittable as they can be, but obviously there is always a limit because we have to put the majority of our efforts on our current production needs. I am sure you can understand. Good luck on your project.

[jstenger]

On the upper arms, it does use the same hole pattern. The arm itself is just bigger. On the 2014 LSV, unfortunately that kit number doesn't exist. The LSV has it's own hinge assembly that is unique to the other boats. We do have a kit for AutoFlow on 2014 and 2015 LSV. However, like I said, we didn't do the LSV for 2016 so there is no AutoFlow 2 kit for the LSV. Again, it is theoretically possible, but it will require parts from an AutoFlow kit and an AutoFlow 2.0 kit. The dash can be reprogrammed, but obviously getting the parts you need without the parts you don't need might be quite difficult and could be costly. Again, you will just have to contact your local dealer and work through that one. They might be able to get ahold of our vendor that is doing that for us and work out something, but I can't promise you anything. We do our absolute best to try and make sure things are as retrofittable as they can be, but obviously there is always a limit because we have to put the majority of our efforts on our current production needs. I am sure you can understand. Good luck on your project.

Sent you a PM.

[lsupcar]

Anyone upgraded to from outflow 1 to 2.0 yet? Or received a price quote?
I asked my dealer Friday to get me a quote for upgrading the autoflow tabs only.
I also want to add a FAE, and I think it would work better with the smaller current wake plate instead of upgrading to the larger 2.0 wake plate.
I'm hoping the smaller wake plate will work well with the outflow 2 tabs.
Anyone with additional info?
Thanks.Bill Z with a 2015 Mojo

[jstenger]

Anyone upgraded to from outflow 1 to 2.0 yet? Or received a price quote?
I asked my dealer Friday to get me a quote for upgrading the autoflow tabs only.
I also want to add a FAE, and I think it would work better with the smaller current wake plate instead of upgrading to the larger 2.0 wake plate.
I'm hoping the smaller wake plate will work well with the outflow 2 tabs.
Anyone with additional info?
Thanks.Bill Z with a 2015 Mojo

You will need the larger upper arms also.

[lsupcar]

You will need the larger upper arms also.

Thanks.
Yes, installing the larger upper arms is part of the plan.
Just wondering if anyone else is pursuing this?

[jmvotto]

I am patiently waiting for the retro fit for the xlv for the auto flow 2.0

[jstenger]

I am patiently waiting for the retro fit for the xlv for the auto flow 2.0

Myself also for the LSV.

[lsupcar]

Myself also for the LSV.

Do you both have price quotes and time frames for delivery?
Bill Z

[jstenger]

Do you both have price quotes and time frames for delivery?
Bill Z

No, it isn't out yet.