Results 1 to 6 of 6
-
06-19-2015, 09:27 AM #1Member
- Join Date
- Jul 2014
- Posts
- 53
2007 XLV Swivel Seat Modification-- super fast and easy
ok, i have read the swivel seat mod stuff on here, and i kinda have my own spin on it. this took approximately 2 hours to complete, except time to gather materials, etc.
Materials:
2 9 x 11.5 x 5/16 aluminum plates--metal fab shop, cost about 25 bucksswivel seat adapter 2.jpgswivel seat adapter.jpg
4 1 1/4" to 1 1/2" bolts, machine head
16 lock washers
20 larger diameter machine washers
hack saw, undercut saw, sawsall--for removing ends of bolts
swivel-- 10 bucks at any boat store
1. take plates and match existing harware locations
2. take plates and match swivel
3. drill holes
4. mount swivel
5. cut off bolt ends
6. attach plate to boat seat rails
7. add machine washers under lower plate (between plastic spacer and lower plate), as needed to level seat. i think i used 6 on each side.
8. cut off bolt ends
9. attach seat to upper plate
10. enjoyLast edited by kdcdds; 06-19-2015 at 09:30 AM.
-
06-20-2015, 01:43 PM #2
Does your swivel lock or have multiple positions?
-
06-22-2015, 08:30 AM #3Senior Member
- Join Date
- May 2015
- Location
- NC
- Posts
- 461
Would this work on a LSV?
2003 Mobius LSV GG Edition - Sold!
-
06-06-2016, 07:18 PM #4Junior Member
- Join Date
- Apr 2016
- Location
- Cartersville, GA
- Posts
- 9
I would love to do this. Any more pictures?
Britt
2008 Moomba XLV Gravity Games Edition
-
06-07-2016, 01:18 PM #5
-
06-07-2016, 01:18 PM #6