Results 1 to 10 of 10
  1. #1
    Join Date
    Sep 2016
    Location
    Minneapolis MN
    Posts
    24

    Default 2016 craz goody wake

    1100 rears, 500 bow bag. How do I get that long curl wake that is clean. Other side is easy and beautiful. Goofy side no curl, washed out


    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    788

    Default

    Quote Originally Posted by xbrandloyal View Post
    1100 rears, 500 bow bag. How do I get that long curl wake that is clean. Other side is easy and beautiful. Goofy side no curl, washed out


    Sent from my iPhone using Tapatalk
    What weights are you running in each of the rear bags? I don't have a craz but I did have an lsv and now a mojo. In both boats, for the goofy wave, I need somewhere in the range of 50% or so in the port bag and 100% in the stbd bag. You need to weight the boat to the stbd side much more than with the port wave.
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  3. #3
    Join Date
    Sep 2016
    Location
    Minneapolis MN
    Posts
    24

    Default

    I've tried both full and 50% opposite side....for better but nothing like standard side wave. Should I drop weight from bow bag?


    Sent from my iPhone using Tapatalk

  4. #4
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    788

    Default

    Quote Originally Posted by xbrandloyal View Post
    I've tried both full and 50% opposite side....for better but nothing like standard side wave. Should I drop weight from bow bag?


    Sent from my iPhone using Tapatalk
    Do you have surf plates? If not, you might need to be more like 100% surf side, 0% - 25% non
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  5. #5
    Join Date
    Sep 2016
    Location
    Minneapolis MN
    Posts
    24

    Default

    I do...2016 craz. I've adjusted the plate. I'll try less weight opposite side!


    Sent from my iPhone using Tapatalk

  6. #6
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    788

    Default

    Quote Originally Posted by xbrandloyal View Post
    I do...2016 craz. I've adjusted the plate. I'll try less weight opposite side!


    Sent from my iPhone using Tapatalk
    Have you read this thread?

    The official slam your craz and surf it thread.

    https://r.tapatalk.com/shareLink?sha...3&share_type=t

    I think it will help you more than I can, as I dont have a craz. Good luck, I hope you get it dialed, as I know it will be amazing when you do.
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  7. #7
    Join Date
    Sep 2016
    Location
    Minneapolis MN
    Posts
    24

    Default

    Quote Originally Posted by moombahighrider View Post
    Have you read this thread?

    The official slam your craz and surf it thread.

    https://r.tapatalk.com/shareLink?sha...3&share_type=t

    I think it will help you more than I can, as I dont have a craz. Good luck, I hope you get it dialed, as I know it will be amazing when you do.

    yes...a few times. Goofy setups still a bit confusing and I don't want more bags on the floor!

  8. #8
    Join Date
    Sep 2016
    Location
    Minneapolis MN
    Posts
    24

    Default

    Today was better! 25% on opposite side of goofy wake...not perfect but better. A little less now weight helped height and I bumped speed to 10.8. Hope that helps others


    Sent from my iPhone using Tapatalk

  9. #9
    Join Date
    Jan 2016
    Location
    Lake Blackshear, GA
    Posts
    40

    Default

    I would add more bow weight. I have enzos in the rears (2/3 on port, full on starboard), 500 IBS plus another 400lb bag I put in the playpen area on the goofy side. I run 11.2-11.5 mph and I have the surf plate at 65-75% depending on how many people (more people = higher plate percentage). I have also been able to drop the wake plate down to 1/4. Nice, long, much cleaner wave with so much push. I agree, though, the regular wave is way easier to create and stays cleaner all the time.
    2016 Moomba Craz

    Boards:
    Day 1 Wake Payne Killer
    Doomswell Drone 4'10"
    Phase 5 Diamond
    Hyperlite Quad
    Lakewakes Hooligan
    Phase 5 grom
    CWB Razr

    Tubes:
    Sombrero
    Bandwagon

  10. #10
    Join Date
    Apr 2013
    Location
    Richmond, VA
    Posts
    123

    Default

    Agree with Jjdyn0mite. Add more weight to the front will help the most and wakeplate at 1/4.
    2017 Axis T23
    2014 Supra SC350 Sold
    2012 Outback V - Sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •