Results 1 to 9 of 9
Thread: Center plug...how to remove?
-
06-09-2015, 12:55 AM #1Senior Member
- Join Date
- Jan 2015
- Location
- Live: OP, KS...Boat: Shell Knob, MO
- Posts
- 167
Center plug...how to remove?
Noob question, is there a tool or easy way to remove the center plug? It seems to be in pretty tight and I can't get any leverage on it. Was hoping there's some makeshift apparatus I could use to twist the T handle.
2013 Mojo
-
06-09-2015, 08:14 AM #2
I used a open end wrench, don't recall the size (9/16?) at the base of the plug.
2014 Mojo Surf
2013 Mojo Sold
2010 LSV Sold
2002 OB LSV Sold
-
06-09-2015, 02:37 PM #3
go with the above for the first time and you probably won't need it after that. but, if you do, this would probably work:
http://www.homedepot.com/p/Orbit-Eme...6097/100030514
-
06-09-2015, 06:05 PM #4
This is what I use.... 15mm, with extension and a ratchet
image.jpgSampp
2014 Mondo
Could be worst
From nice Québec..
-
06-15-2015, 08:19 PM #5
Center plug...how to remove?
Are you talking about the T handled drain plug? You use a wrench?
2008 Moomba Outback DD resurrection
-
06-16-2015, 07:41 AM #6
-
06-16-2015, 09:21 AM #7
Center plug...how to remove?
I just don't tighten it more than hand tight.
2008 Moomba Outback DD resurrection
-
06-16-2015, 03:16 PM #8Member
- Join Date
- May 2013
- Location
- Denton, TX
- Posts
- 55
-
06-17-2015, 09:54 PM #9Senior Member
- Join Date
- Jan 2015
- Location
- Live: OP, KS...Boat: Shell Knob, MO
- Posts
- 167
Center plug...how to remove?
I suppose so, hopefully i won't need the wrench after I get it open for the first time. Thanks for everyone's help.
2013 Mojo