Results 11 to 14 of 14
-
05-21-2015, 08:27 PM #11
Moomba Outback Interior Removal - 2005
You going to get the Moomba running 200 mph?
-
05-21-2015, 09:38 PM #12Junior Member
- Join Date
- May 2015
- Posts
- 10
-
05-21-2015, 10:02 PM #13
Moomba Outback Interior Removal - 2005
Did she call you "Joe" at the end there?
BTW, you're crazy! You didn't even look like you had broken a sweat.
-
12-25-2020, 12:32 PM #14Junior Member
- Join Date
- May 2012
- Posts
- 11
Hoping some of you that were part of this thread see this question.
I have a 2008 Moomba and I removed all the pads and will have all of the vinyl replaced soon.
I am thinking that putting the pads back on is going to be even harder than taking off.
My pads had a combination of studs with lock washer and nut along with screws holding them on.
I am most concerned about how to get the screws back in considering how little space there is. I used a ratcheting box wrench and bit to remove the screws, but I am thinking that installing is going to be much harder. Any advice is appreciated.
Merry Christmas to All.