sub location

[jmvotto]

I only have 10 inch subs. But it seems like I have a decent amount of space still.

The different direction on the diamond pattern would drive my ADHD crazy!
other than tat looks good.

[jstenger]

I cut the hump out and was able to easily fit a 12" in there.

[trayson]

12" under steering...

So you've got a grill covering your waffle grill covering your sub. Double protection, huh? Nobody is getting at your sub!

The different direction on the diamond pattern would drive my ADHD crazy!
other than tat looks good.

Well, it's in the sunken section, so it's kind of in a different section, so it's fine with me. If it was part of the 'main' flooring, I wouldn't have done that.

[Gettin' It]

Bars on that sub!!! lol

[csm]

I cut the hump out and was able to easily fit a 12" in there.

Joe - what did you cut with? It looks like a very clean cut. I was able to get a 12" on top of the hump, but it was a PITA. If I had to redo it, I would cut it out.

[jstenger]

Joe - what did you cut with? It looks like a very clean cut. I was able to get a 12" on top of the hump, but it was a PITA. If I had to redo it, I would cut it out.

I used an air grinder with a cutoff wheel. I had to stick a wood shim in the cut as I went along to spread it slightly. That prevented the fiberglass from pinching the wheel. When I was done cutting, I hit the edge with some emery cloth.