Exile XM30.2 Amp Question....

[Brianinpdx]

Ed - very easy setup on your XM30.2 That amp was designed with the tower zone in mind. The crossover actually starts @ 80hz. So there is zero guess work.

Set the amp to HighPass / HF
Bass boost off - this is not needed
start with a gain setting of 20%. If you are not running a line driver EQ you'll need a bit more. If your running an EQ you might need a touch less. You can msg me later and I can walk you thru your specific boat set up.

Brian

[slipperyrockTKE300]

Thanks Brian!

No EQ on my boat.