This is my second FAE that I've installed and I'm not sure why this install keeps failing off one side. Probably something to do with debris floating in the river and hitting it. So I finally broken down and added some additional screws to help hold it in place.

Only took a few minutes, I removed the FAE and disconnected the rams holding the wakeplate.

Then using an over sized drill bit. I drilled from the inside of the exhaust tube out, near the edge. Drilling threw the metal insert and outer plastic. I didn't want to mess with trying to tighten the screws, just placed them in the holes and slipped the FAE hose over and tightened the hose clamps..

Doubtful it'll come off again...


IMG_20140828_094522.jpg