Results 1 to 9 of 9
  1. #1
    Join Date
    Jun 2012
    Location
    Lake Amistad, TX
    Posts
    636

    Default Ronix Koal Fin Removal?

    I have the 2012 Ronix Koal and I remember a lot of guys from the forum having or rode this board.

    I'm curious if you guys ever played with the fins to change up the ride?

    Remove the center fin? Or the outside fins? What are the pros and cons? Any faster? Less control? Better air?

    Thoughts?

    2004 Outback Blue on White *Sold
    2008 LSV Blue on White
    EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
    2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
    Krypt KMA4200 EQ under driver's side dash to control all the madness
    Z5 Cargo Rack annnnnnnd She's NEKKKKED....

    I'm no expert, I just read up on the Moomba Forum...

  2. #2
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    I don't have this board but the clunky Broadcast got a lot more fun when we removed the center fin and left the two outside ones. It was a little better with just the center one but we found that going with just the two outer ones was even better.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  3. #3
    Join Date
    Aug 2011
    Posts
    2,522

    Default

    I have this one and a cove.

    Try ridding it backwards, without the fin you really have to edge to control the board. It's the same as wakeboarding without a center fin, you really have to work on your edges...



    ronix-500x333.jpg
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  4. #4
    Join Date
    Aug 2011
    Posts
    2,522

    Default

    I wonder if you can even ride that koal backwards? Probably not, be interesting... lol...
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  5. #5
    Join Date
    Jun 2008
    Location
    Henderson, NV
    Posts
    7,033

    Default

    removed center here upon receipt. won't put it back. seemed to make the board easier to ride imo.
    '06 Supra Launch 20SSV-gone but never forgotten

  6. #6
    Join Date
    May 2013
    Location
    Vancouver WA
    Posts
    5,024

    Default

    Quote Originally Posted by tgoody14 View Post
    I have the 2012 Ronix Koal and I remember a lot of guys from the forum having or rode this board.

    I'm curious if you guys ever played with the fins to change up the ride?

    Remove the center fin? Or the outside fins? What are the pros and cons? Any faster? Less control? Better air?

    Thoughts?

    I had a very similar board, the Koal Illuminati. Removing the center fin made it a little bit looser. more fun to ride, a smidge faster. it lost a tiny bit of "grip" on the wave from obviously less fins digging in, but it's such a stable board there's really no big loss in removing the center.

    I never tried it center only. just 3 vs. 2. I sold the board a few weeks ago to put money into my "Doomswell" fund.
    2008 Moomba Mobius XLV. Monster Cargo Bimini, WS Rev 410's, Polk Cabins, 3 Infinity Subs, PPI amps, WS420, Exile BT, upgraded ballast pumps, up to 3,500+ pounds of ballast, Blue LED's...
    1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.
    Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2009 Audic A6 Avant 3.0T, 2005 Kawasaki ZX-6R 636.
    www.TraysonsToybox.com

  7. #7
    Join Date
    Jun 2012
    Location
    Lake Amistad, TX
    Posts
    636

    Default Ronix Koal Fin Removal?

    Awesome info! Thanks guys. I'll start with removing the center. It's been a great board the past two years tho.

    I think I'm just wanting to get a little faster so I can get a little more air, but may have to make the plunge into the next level boards
    2004 Outback Blue on White *Sold
    2008 LSV Blue on White
    EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
    2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
    Krypt KMA4200 EQ under driver's side dash to control all the madness
    Z5 Cargo Rack annnnnnnd She's NEKKKKED....

    I'm no expert, I just read up on the Moomba Forum...

  8. #8
    Join Date
    Aug 2011
    Posts
    2,522

    Default Re: Ronix Koal Fin Removal?

    Faster? I only have a small center fin, doubt it makes it faster, looser yes. You probably need to learn how the pump the board if you want faster and higher..
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  9. #9
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    5,457

    Default

    Doesn't look like FCS style fins? Hmmmmm. Was going to suggest going with something taller like a thruster but not finding anything that would work I don't think. Swore I saw some on eBay but turns out they are FCS.
    So when is this "old enough to know better" supposed to kick in?

    2001 MobiusV - Slightly Modified...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •