Xlv wake.. I'm stumped

[powerstroke99]

Can't get the boat dialed in for the life of me to go rope less .. 07 xlv I got 750s in the lockers , stock center bag.. 800 and two old stock locker bags to move around boat any suggestions be awesome

[BamaMojo]

Post a video of your session....

[powerstroke99]

Post a video of your session....

How would one do that from cell phone

[BamaMojo]

Upload to YouTube or vmeo, then post here

[jmvotto]

What speed are you running and where is the wake plate set.?

[powerstroke99]

What speed are you running and where is the wake plate set.?

Seems like 13 was the best speed.. Wake plate any where's from half to all the way up

https://m.youtube.com/watch?feature=...&v=C428ZXzU5Cw

[brain_rinse]

Have you used gps to calibrate your speedometer? If not there are free apps that do the trick.

What board are you riding?

[powerstroke99]

Have you used gps to calibrate your speedometer? If not there are free apps that do the trick.

What board are you riding?

I have actually never done that.. i have my perfect pass manual that should help me do that right?

its a liquid Force fish.. 5'

[brain_rinse]

Yes the manual will show you the perfect pass speed adjustment and there is a knob under the dash to dial in the analog gauge if it's like mine.

There are others that will help you dial in the wake a little better, but you should be able to free ride that no problem as-is. Looks like that board is only rated up to 180 lbs?

[Boonejeepin]

I would suggest 750 filled in v- drive locker. 800 along surf side seats, center bag full. 400 on floor toward surf side, and the other 400 on surf side of bow. 10.2 - 11mph, wake plate all the way up.

Maybe even try 200 lbs in offside v-drive locker.