Results 11 to 13 of 13
-
08-11-2014, 01:16 AM #11
I have a fix for that port if you can't get it. Ripped mine completely out of an 1180 bag. Replaced with new Flow Rite bulkhead fitting. Appears to be holding just fine after beating up on it this weekend.
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
08-11-2014, 11:38 PM #12
Integrated Bow Sac (Fly High Pro X)
Good idea berg, but I think I've got it. I used water weld to repair the port, then agin to seal the threads, and again around the inside and outside. It's water tight and I expect it to hold up for awhile now.
-
08-11-2014, 11:46 PM #13
I'll sand it to make it look a little better once it's fully cured but it ain't pretty. The water weld is pretty impressive stuff if you haven't used it before.
Anyway, I'll take $85 plus shipping if anyone is interested. I will include the fly high quick connects for each 3/4" leg port and the 1" fill port on the right leg that can all be capped if not needed. The left leg top port and center top port will include plugs.