Results 1 to 9 of 9
Thread: Seat removal
-
07-24-2014, 07:29 PM #1
Seat removal
What's the trick removing the seat on an 06-08 obv, 05- möbius? My anchor screws look like they're tamper proof. Looks difficult unless they aren't too tight.
2006 Outback V
1992 Ski Nautique Open Bow
-
07-25-2014, 12:48 PM #2Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,786
If you are talking about the drivers seat, on my 08 OBV there is just 4 bolts under the cushion. Once you have the 4 nuts removed seat pulls up.
2008 Outback V - Sold but never forgotten.
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill
-
07-25-2014, 01:32 PM #3
-
07-31-2014, 04:18 PM #4
What I'm referring to is the seat base. I should have been more clear.
2006 Outback V
1992 Ski Nautique Open Bow
-
08-03-2014, 12:39 PM #5
-
08-04-2014, 01:09 AM #6
-
08-04-2014, 09:51 PM #7
Seat removal
I'd build a riser bracket to raise the seat.
Pull the entire floor to replace the carpet. It's pretty easy to do, follow the perimeter removing all the screws. Need two people to lift it out easily.
-
02-05-2015, 04:05 PM #8
So on my boat the seat base is part of the fiberglass floor so no way to detach. I ended up Using some of my kids old skateboard wheels and longer bolts. It raised the seat approx 2 inches. I'll have to see how it feels this summer as I did this adjustment after I winterized the boat. It feels better just sitting in it though.
2006 Outback V
1992 Ski Nautique Open Bow
-
02-05-2015, 04:47 PM #9
You'll be happy. My swivel mod moved mine up about 2 1/2" and it's way better.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!