Results 1 to 9 of 9
-
07-03-2014, 07:49 PM #1Member
- Join Date
- Jun 2013
- Location
- Saratoga Springs, NY
- Posts
- 52
Stuck need a new carb - what model?
Towed my boat 400 miles up to big bear and got her to find my carbs fuel bowl is cracked.. Stuck in the shop and I need to order a new carb.. I understand the 06 had some casting issues but want to get on the road while on vacation..
I'm told it a holley 4150 but my not sure which model, anyone know the right replacement. I'm told electric chock, vac sec only only I can find on the holley site is the 600cfm.
Thanks for your help..
Stuck on the dock in big bear..
-
07-03-2014, 08:24 PM #2Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Stuck need a new carb - what model?
I don't think its made any more, skidim has them or one that works, or call holley with the numbers on the air horn. I
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
07-03-2014, 11:55 PM #3Member
- Join Date
- Jun 2013
- Location
- Saratoga Springs, NY
- Posts
- 52
Stuck need a new carb - what model?
I located a quick fuel m-650. Shop said it was a good replacement for the 4150. Anyone have experience with this carb?
2020 Kaiyen
2006 LSV- Sold
-
07-04-2014, 05:44 PM #4Member
- Join Date
- Jun 2013
- Location
- Saratoga Springs, NY
- Posts
- 52
-
07-10-2014, 12:32 AM #5Member
- Join Date
- Jun 2013
- Location
- Saratoga Springs, NY
- Posts
- 52
Stuck need a new carb - what model?
Going to give Holley a call and see if the is one of the bad cast back. Here are a few pics of the cracks.
Here is the model info
2020 Kaiyen
2006 LSV- Sold
-
07-11-2014, 09:53 PM #6Member
- Join Date
- Jun 2013
- Location
- Saratoga Springs, NY
- Posts
- 52
Stuck need a new carb - what model?
Called Holley today and they are going to send me a replacement it was part of the lot that had a bad casting.
So now the question is keep the quick fuel seems to be running well or put the Holley back on? Thoughts ?2020 Kaiyen
2006 LSV- Sold
-
07-12-2014, 08:24 AM #7
No reason I could think of to not continue running the Quick Fuel, it's new and should give great service. Rebuild the Holley and keep it for a spare. Not that you would ever need a spare but just in case.
Kevin
2012 Launch 242
-
07-14-2014, 12:58 AM #8Member
- Join Date
- Jun 2013
- Location
- Saratoga Springs, NY
- Posts
- 52
Going to be sending in my broken carb and Holley is sending me back a new one.. May look to sell it and recover some of my out of pocket money spent buying and having my new carb installed in Big Bear. Great guys at the marina but an unexpected need to dig deep out of my pocket to get the lsv running while on vacation..
Anyone need a new holley?
-
07-21-2014, 01:54 PM #9Member
- Join Date
- Jun 2013
- Location
- Saratoga Springs, NY
- Posts
- 52
Finally got out this weekend. Had to do some adjustment on my new carb now that I am at much lower altitude and it ran great. The only thing I noticed was a lot more fumes coming out of the three vents at the back of boat. I'm hoping this will burn off or maybe time to get a fresh air exhaust. I never noticed it before. Any thoughts?
2020 Kaiyen
2006 LSV- Sold