Results 11 to 17 of 17
Thread: Help dialing in the wake ...
-
07-18-2014, 11:35 AM #11
Glad it worked out for you, Note, as you add weight to the Goofy it will keep getting better to a point, once you start seeing that tall wave with a short pocket, have someone larger sit in the bow on the surf side.
As you get more and more people you can have someone sit on the port side but you might find you have to lower the bag weight to keep your weight clean.
Now you have a good base to work with on your wave. Its a balancing act with your weight in the boat as much as it is you on the board.
Also glad I could contribute to you getting her dialed in.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
07-18-2014, 01:28 PM #12
You blow me away with your wealth of info Mike.........do you keep a big notebook on your boat to record all this stuff???? I only say that in a somewhat joking manner because that is an exact thought I had just last weekend as I can never remember all the setup. I can barely remember what speed my son and daughter like to wakeboard at...
Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
07-18-2014, 02:54 PM #13
SWEET!! Glad to hear it worked for you... I put a 370 tube sack under the seats on the goody side and was able to fill the regular side bag to about 90% it kept wave clean and lengthened it out. I find I have a lot more control shaping the wave with my mondo than I did with my 05LSV. On my old boat if it wasnt all the way up the wave was not ridable ropeless.. with the mondo I can play around a lot more.... fun fun fun
Sent from my SGH-I337M using Tapatalk2014 Mondo with da flow!!! Exile towers, stock everything else.... for now!
-
07-18-2014, 02:54 PM #14
Sorry to clarify. .. I mean usi g the wakeplate for shaping the wave
Sent from my SGH-I337M using Tapatalk2014 Mondo with da flow!!! Exile towers, stock everything else.... for now!
-
07-18-2014, 05:08 PM #15
Its just what I do, Surfing to me is the main reason why I have the boat and for me its all about making that insane wave, and it pains me to see boats pass that are surfing and all I see is white wash.
The least I can do is help my SC family make there's as nice as I can.
Saskyrider, I know what you mean with the wake plate and adjustments. First thing I noticed when we weighted our Mojo was the plate actually works in all settings.
Now me and my bro Steve like the plate all the way up, buddy Carlos likes 1/2 and the newbies get 0 and the wave is always clean.
Its a little more finicky on Goofy but over all its clean in all settings.
I think this has to do with the hull shape not being as flat as the LSV on the bottomMalo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
07-19-2014, 03:00 AM #16Senior Member
- Join Date
- Jan 2014
- Location
- Kelowna, BC Canada
- Posts
- 426
So Wakemakers got the 900s in today so I pulled the trigger.
2 x 900 Sumo's
1 x 650 IBS
and all the hardware I need for the install. Also got the kit that allows me to use the factory bags if I can find a place for em.
Shipped same day so I'm pretty stoked. Hoping it gets here sometime next week!!2014 Black/White Mojo
345HP Surf Motor
1235 Prop
Autoflow 2.0 Upgrade
1100# FlyHigh Rears
650# IBS
4 x Exile SXT9q's w/ Exile 30.2 amp and Exile ZLD controller
Exile Javelin Amp
10" Rockford sub
-
07-19-2014, 10:11 AM #17
You are going to be very happy with that setup!!! Enjoy!
Sent from my SGH-I337M using Tapatalk2014 Mondo with da flow!!! Exile towers, stock everything else.... for now!