Results 1 to 7 of 7
Thread: Help dialing in the wake
-
07-26-2014, 11:26 PM #1Member
- Join Date
- Apr 2012
- Location
- Pueblo, CO
- Posts
- 31
Help dialing in the wake
We have an 02 möbius v and it has the stock hippo ballast. We upgraded the rear bags to 650s but the wake is still not clean. I filled the surf side sac full, had both adults in the boat on the surf side, center ballast full (not sure of the size), speed at 10-10.7. Any suggestions would be extremely helpful.
Hauss66
2002 Möbius V
325 HP Indmar Assault
-
07-27-2014, 09:11 PM #2
I would slow down .5 mph at a time and maybe put some weight in the bow. I run 9-9.5mph when I surf
2008 Outback V
Gravity III ballast
750 rear lockers
Stock center
-
07-27-2014, 10:29 PM #3Member
- Join Date
- Apr 2012
- Location
- Pueblo, CO
- Posts
- 31
Thanks Klos, I'm going to give it a whirl Friday afternoon
Hauss66
2002 Möbius V
325 HP Indmar Assault
-
07-31-2014, 12:29 PM #4Junior Member
- Join Date
- Jul 2012
- Posts
- 6
Hey Klos, I also have an 08' OBV with stock Gr. III and Moomba Cruise and have just started surfing this year. I take an extra 300-400lbs of lead weight depending on people I have in the boat. How do you set yours up with weight and what kind/size board do you have?
2008 Outback V
Gravity III
-
07-31-2014, 01:25 PM #52008 Outback V
Gravity III ballast
750 rear lockers
Stock center
-
07-31-2014, 06:31 PM #6Junior Member
- Join Date
- Jul 2012
- Posts
- 6
Thanks, I have the Hyperlite Broadcast 5'4" and seems to be a good board. But sounds like I'm going to need more ballast or just make sure I have a lot of people in he boat.
2008 Outback V
Gravity III
-
07-31-2014, 08:00 PM #7Banned
- Join Date
- May 2014
- Location
- Clermont, Fl
- Posts
- 586
Please....don't use lead weight.
For safety sake - stick to water ballast.