Results 241 to 250 of 251
-
06-17-2020, 01:28 AM #241Junior Member
- Join Date
- Jun 2020
- Posts
- 5
I know this is an old thread but Im about to do this job and have questions, did you guys use hydroturf underpad or just the hydroturf itself? Any advice on the seems when connecting multiple mats?
-
06-17-2020, 09:14 AM #242Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
06-18-2020, 01:34 AM #243Junior Member
- Join Date
- Jun 2020
- Posts
- 5
Thank you for the reply, I went with the diamond since it is molded. I loved the long diamonds that was seen on the green moomba but it is the sup/surf category and may be soft and I didnt want to risk it. I did not order the underpad. Mine is actually going on a closed bow boat so hopefully it will end up being a clean job. Now to the fun part, scraping glue.
-
06-18-2020, 08:11 PM #244Junior Member
- Join Date
- Jun 2020
- Posts
- 5
97FA28E3-FAB3-4BB1-B9EA-F456BB93E125.jpgI’m wondering (I’ve read this whole thread and searched) how in depth of a job did you guys do on removing the glue. Most of my boat it’s coming up easy but some places (especially underneath the carpeting on the sides) the glue is not going to want to come up. I can get the remnants of carpet off but feel I’m doing more harm on the fiberglass than I am the glue. Any thoughts?
-
06-18-2020, 08:53 PM #245Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
You want the floor flat and clean, you don't need to remove all the old adhesive if it's dry and the hydro sticks to it.
Also try some aceton or paint thinner.http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
06-18-2020, 10:03 PM #246Junior Member
- Join Date
- Jun 2020
- Posts
- 5
The floor is smoothing out pretty well because it sat in the sun so long, the sides which I am doing with hydroturf too have been in the shade and all that glue is nice and strong still. I think im going to take an orbital sander to it carefully and really get all the glue off, then go through with acetone one time. Just need a respirator and all the local department stores are sold out, go figure.
-
03-12-2021, 12:59 PM #247Junior Member
- Join Date
- May 2020
- Posts
- 1
Rakkasan (or anyone) -
I know this is an old thread, but hoping you may see this question...
Pulled out carpet from 06 LSV and unscrewed the aluminum L brackets that hold the seat bases to the floor all around the boat. It may sound crazy, but I could not lift any part of the fiberglass seat bases at all - not even a little bit. In my 06, it seems that seat bases, walls, gunnel, back transom, etc are all a continuous fiberglass. It seems like trying to lift any part would mean you practically have to lift the entire thing, gunnels and all.
Am I missing something obvious??
-
03-12-2021, 02:12 PM #2482008 Moomba Mobius XLV. Monster Cargo Bimini, WS Rev 410's, Polk Cabins, 3 Infinity Subs, PPI amps, WS420, Exile BT, upgraded ballast pumps, up to 3,500+ pounds of ballast, Blue LED's...
1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.
Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2009 Audic A6 Avant 3.0T, 2005 Kawasaki ZX-6R 636.
www.TraysonsToybox.com
-
05-06-2021, 09:03 AM #249Junior Member
- Join Date
- May 2021
- Posts
- 1
I've been looking at this also for my Champion. Seadek looks to be the best stuff available, but is very expensive. Hyroturf seems to be the standard. Blacktip Jetsports makes a product just like Hydoturf. I have received samples of both and will probably use the Blacktip. shareit vidmate app
-
05-06-2021, 10:14 AM #250
Heads up if you go Seadek, I just sent my template in and they sound pretty back logged now. They quoted me 8 weeks to get it back, which means Im going to deal with the carpet one more summer....itll have to be a fall project for me.