Results 1 to 4 of 4
Thread: Carpet Issues
-
08-20-2014, 05:10 PM #1
Carpet Issues
Hey guys, I'm curious what thoughts are out there on an issue I made for myself.
Got a few small spots on the boat carpet where a 2 year old tracked gum into the boat. I used small amounts of Goo Gone on a small foam paintbrush to dab the area, and pull up the gum. The Goo Gone was followed by standard carpet cleaner to try to wick the Goo Gone out, and I thought I had got most of it. Worked super slick. However, the next time I popped open the boat, where I had used the Goo Gone, the carpet had bubbled up and was no longer stuck to the boat.
Like I said, I used a very small amount of it by just dabbing, but it was obviously enough to wick down into the carpet and release the backing from the glue below.
I am trying to figure out how to get these spots re-stuck. You guys have any ideas? I have a few, but don't like any of them too well.
Thanks in advance.2015 Supra SC400
08 LSV - Sold
Go big, or go home.
-
08-20-2014, 05:25 PM #2
Carpet Issues
Try a syringe with glue.
Sent from my iPhone using TapatalkShane
2016 Supra SE
EXILED
6 XM9 Tower
6 Wetsounds XS650 Cabin
1 EXILE BIG 12 DVC 2000 watt in a ported box
1 XM 15.4
XI 1500.1
2 MX 30.2
Wetsounds 420 EQ
EXILE Blue tooth EXBT4
Blue LEDs
-
08-20-2014, 05:34 PM #3
-
08-21-2014, 10:10 PM #4Senior Member
- Join Date
- May 2013
- Posts
- 253
Super glue in the gel form. But it at a rc/model shop