Results 51 to 60 of 73
-
08-28-2017, 02:04 AM #51
Right on. I did have to cut a bit off each side for it to fit in on mine. Not having it on now i do miss how quite it is and the fumes are better unless im idling at 5 or under. Well worth making one that wont effect the wake. Thanks for the feedback.
Sent from my SM-G930V using Tapatalk
-
03-23-2018, 09:46 PM #52
Well here is my contraption. In retrospect i might have been able to go straight out instead of up. Im sure the new plate would have kept the water from hitting it. But really wanted to go through the plate to keep the spray from the down pipe to a minimum. Not the best looking but should work well.
Sent from my SM-G930V using Tapatalk
-
03-23-2018, 09:47 PM #53
-
03-23-2018, 10:07 PM #54
Wow, that's crazy! Keep us updated. Looks like your wallet plate is fixed?
2008 Moomba Mobius XLV. Monster Cargo Bimini, WS Rev 410's, Polk Cabins, 3 Infinity Subs, PPI amps, WS420, Exile BT, upgraded ballast pumps, up to 3,500+ pounds of ballast, Blue LED's...
1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.
Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2009 Audic A6 Avant 3.0T, 2005 Kawasaki ZX-6R 636.
www.TraysonsToybox.com
-
03-23-2018, 11:36 PM #55Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
You may want to read do that, probably fill up with water when idling.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
03-24-2018, 12:37 AM #56
Yes mine is a fixed plate.
Sent from my SM-G930V using TapatalkLast edited by gravity; 03-24-2018 at 12:41 AM.
-
03-24-2018, 12:39 AM #57
Last edited by gravity; 03-24-2018 at 12:50 AM.
-
03-24-2018, 02:00 AM #58
Not trying to knock your design, did you think of routing each exhaust to turn outside and then down? Two outlets that went around the plate?
Sent from my P00I using Tapatalk2018 Supra SL400
-
03-24-2018, 02:16 AM #59
Ya. I quess i could have had the two pipes turn down and go through the plate. But i figured one thing stiking in the water is better than two. And really like the idea of going through the plate. Hope it works. I was trying for somthing simalar to the centurion silent stinger. I appreciate the comments.
Sent from my SM-G930V using Tapatalk
-
03-24-2018, 09:41 AM #60Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Angle up a little bit yes, but 90 bend vertical is a different story. I would think it would trap water between the riser and the bend, not horrible but kinda like sticking a potato in your exhaust.. �� Drill some holes so the water can drain or redo it and have the pipes come straight out then down.
Last edited by parrothd; 03-24-2018 at 09:45 AM.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead