Results 1 to 8 of 8
Thread: OPS change
Hybrid View
-
07-01-2014, 01:39 AM #1
OPS change
so im thinking about getting that oil pressure switch for the boat. my question is, when i pull the old one out will oil also come out as well? would like to know so if it does i can have oil on hand so i dont have to go back to the store to get oil ha
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
07-01-2014, 03:42 AM #2
No there will be oil. It is a switch that messures pressure and when the motor is off there is no oil pressure so it wont leak out.
Yellow over White 99 Mobius 21'open on jet black double axle
-
07-05-2014, 04:46 PM #3
can anyone throw up a pic or tell me where the pressure switch is? i looked around the motor and didnt see it
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
07-05-2014, 05:00 PM #4
On a 5.7. it right next to the filter mount.
-
07-05-2014, 05:07 PM #5
I'm assuming it's this rusted thing then haha...if it is then I have the wrong ops I bought ha
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
07-05-2014, 05:55 PM #6
that is definitely an oil pressure sender for a gauge. If what you bought is small, then its likely for a light/sounder