Results 1 to 8 of 8

Thread: OPS change

  1. #1
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,372

    Default OPS change

    so im thinking about getting that oil pressure switch for the boat. my question is, when i pull the old one out will oil also come out as well? would like to know so if it does i can have oil on hand so i dont have to go back to the store to get oil ha
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  2. #2
    Join Date
    Apr 2014
    Location
    Roanke, VA
    Posts
    30

    Default

    No there will be oil. It is a switch that messures pressure and when the motor is off there is no oil pressure so it wont leak out.
    Yellow over White 99 Mobius 21'open on jet black double axle

  3. #3
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,372

    Default

    can anyone throw up a pic or tell me where the pressure switch is? i looked around the motor and didnt see it
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  4. #4
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    2,467

    Default

    On a 5.7. it right next to the filter mount.

  5. #5
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,372

    Default

    I'm assuming it's this rusted thing then haha...if it is then I have the wrong ops I bought ha
    Attached Images Attached Images
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  6. #6
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    2,467

    Default

    that is definitely an oil pressure sender for a gauge. If what you bought is small, then its likely for a light/sounder

  7. #7
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,372

    Default

    yeaa..looks like i found the same one on bakes.. (http://bakesonline.com/detail.aspx?ID=1063 ) could be the reason why the boat wont start..its either the OPS is bad or one of the relays..thats what i have come down to. did a jump from the ignition straight to the pump and when u turn the key to on it pumps fuel, so the pump is good. when you try to start theres no fuel pushing out of the injectors..
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  8. #8
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,372

    Default

    is there a way i can cross ref. the switch with one from autozone?
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •