Results 1 to 6 of 6
-
04-11-2006, 10:25 PM #1Junior Member
- Join Date
- Dec 2005
- Posts
- 7
Installing the bow filler cushion
Has anyone installed a bow filler cusion on a 05 mobius lsv? I have no idea where to drill holes or what kind of srews to use. If anyone could email pics of a installed one from the outside and inside it would be greatly appreciated. My email is [email protected]
-
04-12-2006, 08:29 AM #2Junior Member
- Join Date
- Jan 2006
- Posts
- 6
Replying to Topic 'Installing the bow filler cushion'
I am interested in this also. I received my bow filler cushion without instructions or hardware. Is this easy to do?
-
04-12-2006, 01:43 PM #3Senior Member
- Join Date
- Dec 2004
- Location
- Cinci-Dayton
- Posts
- 1,014
Replying to Topic 'Installing the bow filler cushion'
I hear that the 06 (outback) version is better than the 05. I woud not drill holes. I would rig the front to set in the cup holders and drop a rear support to the floor in the rear. I'd make a box to ist on if necessary but I would not drill holes.
Also, I looked at this and the general opinion was that those with it, do not use it. I went with the FAE (fresh Air Exhaust) system instead as my up grade this year. I will be installing that today or tomorrow. Another WORK day at teh lake
SD2Naked red and white 2005 Moomba LSV
Teaching my kids to Ride, Shoot Strait and Tell the Truth
-
04-13-2006, 12:31 AM #4Junior Member
- Join Date
- Jan 2006
- Posts
- 6
Replying to Topic 'Installing the bow filler cushion'
Why would you not drill holes? Is it because the gel coat could crack or just because most people end up with permenant holes in their boat and not use the cushion. I did not think about making a box to sit it on. Thanks for your help.
-
05-20-2015, 08:55 PM #5Member
- Join Date
- May 2015
- Location
- Grand Rapids, MI
- Posts
- 54
Does anyone have pictures of the mounts and/or how they supported their bow filler cushions?
-
06-08-2015, 08:20 PM #6
Here's a picture of mine it's factory 2014-07-14_20-31-13_862 (1).jpg
2004 Mobius LSV 340 HP
Gravity III Ballast
750s in Rear
Stock 400 in Front
Similar Threads
-
Bow Filler Cushion
By Nimrod in forum Moomba ClassifiedsReplies: 0Last Post: 05-26-2007, 12:04 PM -
Bow Filler cushion wanted
By in forum Moomba ClassifiedsReplies: 0Last Post: 08-24-2006, 10:06 PM -
05 Mobius LSV Bow Filler Cushion
By SirMobius in forum Moomba ClassifiedsReplies: 2Last Post: 01-23-2006, 12:27 AM -
Bow cushion filler
By seanpatsdad in forum General ChatReplies: 7Last Post: 05-15-2005, 08:06 PM -
Wanted, Filler Cushion
By npcain1 in forum Moomba ClassifiedsReplies: 0Last Post: 05-06-2005, 11:24 AM