Results 21 to 30 of 75
-
06-25-2014, 01:14 PM #21
-
06-25-2014, 01:15 PM #22Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
06-25-2014, 01:34 PM #23
-
06-25-2014, 02:00 PM #24
Well, I've never seen a 1 1/8" ball valve anywhere. My method was to adapt the ball valve to 1" hose and then put it on the inlet.
You did not respond saying where you would get the tsunami pump with normal threads on it.My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
06-25-2014, 02:32 PM #25
-
06-25-2014, 02:39 PM #26
-
06-25-2014, 02:48 PM #27
Interesting. I've never seen a T1200 advertised with anything other than their goofy threads.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
06-25-2014, 08:45 PM #28
Ive been using for probably 3 years now.
-
06-26-2014, 09:05 AM #29
Looks like Wakemakers has them. An extra $10 or so to get the right threads.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
07-19-2014, 09:26 PM #30
Well a lil update I went with 3 separate tsunami 800 pumps, reason be I didn't want change all the hose to 1in fittings and all that stuff so kept the 3/4" stuff and I figured I can fill all three bags at same time and still be faster then stock.. They all have there own separate intake going to take out this weekend and find out how it does..image.jpgimage.jpg
07 Gravity Games Edition XLV
-EXiled Out System Amps,Sub,Speakers,etc.. Modified Gravity III Ballast, Blue Leds Throughtout boat, still more to come!
02 Moomba LSV "SOLD"
Tow Rig-12' F150 Ecoboost-leveled/intake